AutoCAD LT General Discussion

AutoCAD LT General Discussion

Reply
Member
alaskanmatt
Posts: 3
Registered: ‎04-16-2009
Message 1 of 10 (13,345 Views)

How do you rotate a view in paper space (an mview)

13345 Views, 9 Replies
04-17-2009 10:54 AM
Since mvsetup and dview are not available in LT.....

The UCS_Z_90_Plan_Current works while in model...... but when you switch back to paper, it rotates back to the way it started
*Dean Saadallah
Message 2 of 10 (13,345 Views)

Re: How do you rotate a view in paper space (an mview)

04-17-2009 12:09 PM in reply to: alaskanmatt
Go to a paperspace layout and double click on the Viewport you want to
rotate, so you're in the Viewport.
At the command line type in UCS enter, then type Z enter.
Select a point on the bottom right of your base line then select a point to
the left of your base line then press enter. your X axis should now be
aligned with the view you want.
Now in the command line type Plan then press enter twice.
This will rotate your View so that your UCS is now right angles to the
screen (same as your view), you just need to scale the view port.
OR
You can rotate an entire view within a layout viewport by changing the
UCS and using the PLAN command.
With the UCS command, you can rotate the XY plane at any angle around
the Z axis. When you enter the PLAN command, the view rotates to match
the orientation of the XY plane.


--
Dean Saadallah
http://LTisACAD.blogspot.com
--
*Expert Elite*
Charles_Shade
Posts: 8,204
Registered: ‎04-10-2005
Message 3 of 10 (13,345 Views)

Re: How do you rotate a view in paper space (an mview)

04-19-2009 08:25 AM in reply to: alaskanmatt
Right to Left is not intuative. Without testing here is there reason why not left-right?
Regards, Charles Shade            Win8 FAQ
CSHADEDESIGN|AUTOCAD LT|LT-KB|DYNAMIC BLOCKS

 
Please mark Accept as Solution if your question is answered. Kudos gladly accepted.
Distinguished Contributor
cdavis7254
Posts: 141
Registered: ‎05-02-2007
Message 4 of 10 (13,345 Views)

Re: How do you rotate a view in paper space (an mview)

05-29-2009 07:36 AM in reply to: alaskanmatt
Thanks for actually explaining the process. My problem is that now the ucs in the modelspace is turned. Is there a way to only change the UCS for the viewport and not the modelspace? I don't want the UCS turned for the whole drawing, just the viewport.

Thanks,
Cary
Distinguished Contributor
cdavis7254
Posts: 141
Registered: ‎05-02-2007
Message 5 of 10 (13,345 Views)

Re: How do you rotate a view in paper space (an mview)

05-29-2009 07:45 AM in reply to: alaskanmatt
figured it out, went back to modelspace & set UCS to world again - the paperspace layout stayed the way I wanted it turnd & the modelspace is right.

Cary
Member
djmirod
Posts: 4
Registered: ‎03-22-2011
Message 6 of 10 (12,851 Views)

Re: How do you rotate a view in paper space (an mview)

03-22-2011 09:31 AM in reply to: alaskanmatt

Command: MVSETUP |option> Align |option> Rotate

 

click north to south or east to west etc... pending on the direction you would like to orient you view, best of luck.

 

 

*Expert Elite*
Charles_Shade
Posts: 8,204
Registered: ‎04-10-2005
Message 7 of 10 (12,841 Views)

Re: How do you rotate a view in paper space (an mview)

03-22-2011 12:17 PM in reply to: djmirod

Command MVSETUP is not available in LT.

 

Regards, Charles Shade            Win8 FAQ
CSHADEDESIGN|AUTOCAD LT|LT-KB|DYNAMIC BLOCKS

 
Please mark Accept as Solution if your question is answered. Kudos gladly accepted.
Member
djmirod
Posts: 4
Registered: ‎03-22-2011
Message 8 of 10 (12,836 Views)

Re: How do you rotate a view in paper space (an mview)

03-22-2011 01:22 PM in reply to: Charles_Shade

Yes that is true, but hopefully this will help someone who does have the full version, since this page is all I could find, I put the answer here for any one else that did not know, like I did not know!

*Expert Elite*
Charles_Shade
Posts: 8,204
Registered: ‎04-10-2005
Message 9 of 10 (12,822 Views)

Re: How do you rotate a view in paper space (an mview)

03-22-2011 05:21 PM in reply to: djmirod

Forums Home

 

I admire your tenacity to help others but it can also be useful to inform those who may come across this in the LT Forum that this feature is not available to them thru at least the 2011 release. 

Regards, Charles Shade            Win8 FAQ
CSHADEDESIGN|AUTOCAD LT|LT-KB|DYNAMIC BLOCKS

 
Please mark Accept as Solution if your question is answered. Kudos gladly accepted.
New Member
pmversteeg
Posts: 1
Registered: ‎08-11-2014
Message 10 of 10 (2,294 Views)

Re: How do you rotate a view in paper space (an mview)

08-11-2014 05:04 AM in reply to: Charles_Shade

Solution:

 

- Create a view with MView and Polygonal with 4 points

- Rotate the total View on user asked angle

- Create new square

- Replace the 4 points on the square

- Remove square

- Ready

 

Well this works for me

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Do you have 60 seconds to spare? The Autodesk Community Team is revamping our site ranking system and we want your feedback! Please click here to launch the 5 question survey. As always your input is greatly appreciated.