FATAL ERROR lead me to update patch - patch won't install...?

[Anonymous]

FATAL ERROR: Itinit: Error getting linetype from symbol table

That was my original error. The file opens to some percentage then crashes.

This is similar to other crashes i've had. The common thread through all the crashes is when attempting to recover all Layers go AUDIT-BAD-LAYER. Sometimes It'll load and i can clean out the bad layers. Yet each time seems to be a slight bit different than the last.

While installing the patch i get:
Error 114: The AutoCAD LT 2002 update was not applied

Help!

(Strangly enough, I have a feeling it's from using the Hatch tool to extensivley.)

[Anonymous]

Error 114 means you downloaded the wrong patch. Get the correct
one (down them all if you are confused by the definitions).

--
Dean Saadallah
http://www.pendean.com
Expanded Links Page
http://www.pendean.com/lt/links.htm
--

"csrdesign" wrote in message
news:f1175b3.-1@WebX.maYIadrTaRb...
> FATAL ERROR: Itinit: Error getting linetype from symbol table
> That was my original error. The file opens to some percentage
then crashes.
>
> This is similar to other crashes i've had. The common thread
through all the crashes is when attempting to recover all Layers
go AUDIT-BAD-LAYER. Sometimes It'll load and i can clean out the
bad layers. Yet each time seems to be a slight bit different than
the last.
>
> While installing the patch i get:
> Error 114: The AutoCAD LT 2002 update was not applied
>
> Help!
>
> (Strangly enough, I have a feeling it's from using the Hatch
tool to extensivley.)
>

[Anonymous]

Do your drawings contain Xrefs which you might be
associatively hatching against?

"csrdesign" <cad@csrdesign> wrote
in message
href="news:f1175b3.-1@WebX.maYIadrTaRb">news:f1175b3.-1@WebX.maYIadrTaRb...

style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">FATAL
ERROR: Itinit: Error getting linetype from symbol table

That was my original error. The file opens to some percentage then crashes.

This is similar to other crashes i've had. The common thread through all
the crashes is when attempting to recover all Layers go AUDIT-BAD-LAYER.
Sometimes It'll load and i can clean out the bad layers. Yet each time seems
to be a slight bit different than the last.

While installing the patch i get:
Error 114: The AutoCAD LT 2002 update
was not applied

Help!

(Strangly enough, I have a feeling it's from using the Hatch tool to
extensivley.)

[Anonymous]

Yes all the drawings have hatchwork that is associated against. Our files crash right when the drawing is loading the xref. Will the patch fix it? Or do we stop hatching with the Xref on?