Dimstyle-Arcticks with Arrow Quick Leaders

[Anonymous]

I have tried every trick in the book to get the new 2000i Dimension styles
to have an archtick with an arrow leader sub style.
The settings are never saved when the drawing is opened again. There is no
"save" button in the dialog box.

If I set the variables up in R14 with the parent style as a tick and the
sub-style leader as an arrow, then the settings work and are saved and
usable in 2000i.

I have followed the instructions for setting up the new sub-style in 2000i
and the settings always revert to just archtick.
I have had luck with the sub-style radial, diameter and angular settings
saving as arrow styles. The Quick leader seems to be the glitch.

Anyone have this problem?
JB

[Anonymous]

Actually open up the DDIM command, and make sure you are settings
in the various Tabs are saved to your DIMSTYLE and you are not
creating a sub-dimstyle.

QLEADER, although it should respect your tick of choice if set
through DDIM, has it's own settings window. Start the command,
then type S and hit ENTER: a new pop-up appears, and you can set
QLEADER parameters there.

HELP in AutoCAD can explain all the above.

--
Dean Saadallah
www.pendean.com
---
"Jeff Brown" wrote in message
news:7BEFCEFC1660A2C904B5371EFB45377E@in.WebX.maYIadrTaRb...
> I have tried every trick in the book to get the new 2000i
Dimension styles
> to have an archtick with an arrow leader sub style.
> The settings are never saved when the drawing is opened again.
There is no
> "save" button in the dialog box.
>
> If I set the variables up in R14 with the parent style as a
tick and the
> sub-style leader as an arrow, then the settings work and are
saved and
> usable in 2000i.
>
> I have followed the instructions for setting up the new
sub-style in 2000i
> and the settings always revert to just archtick.
> I have had luck with the sub-style radial, diameter and angular
settings
> saving as arrow styles. The Quick leader seems to be the
glitch.
>
> Anyone have this problem?
> JB
>
>
>