changing crosshair angle

[Anonymous]

I opened a dwg I created in acad 12. Now we jumped to lt2002.The dwg is an iso and the crosshairs are 0n a 30 degree angle. I cant find the option to change it back to normal vertical and horizontal.Anyone, please help.

[Anonymous · Accepted solution]

SNAPANG command: look up usage in HELP. Also, make sure your UCS is set to
WORLD: turn on your UCSICON and make sure your cursor orientation matches
what you want to achieve too.

--
Dean Saadallah
http://www.pendean.com
Expanded Links Page
http://www.pendean.com/lt/links.htm
--

"koehler" wrote in message
news:f11b110.-1@WebX.maYIadrTaRb...
> I opened a dwg I created in acad 12. Now we jumped to lt2002.The dwg is an
iso and the crosshairs are 0n a 30 degree angle. I cant find the option to
change it back to normal vertical and horizontal.Anyone, please help.

[Anonymous · Accepted solution]

Use "DSETTINGS" command or right click
the SNAP button at the staus bar and select "Settings".
Switch from "Isometric snap" to "Rectangular snap".
Or use "SNAP" command -> Style -> Standard or Isometric.

Use F5 to toggle different Isomteric views.
Or use ISOPLANE command.

Conny


"koehler" skrev i meddelandet
news:f11b110.-1@WebX.maYIadrTaRb...
> I opened a dwg I created in acad 12. Now we jumped to lt2002.The dwg is an
iso and the crosshairs are 0n a 30 degree angle. I cant find the option to
change it back to normal vertical and horizontal.Anyone, please help.

[SeedyNotions]

SNAPSTYL Set to 0