AutoCAD Land Desktop (Read Only)
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Reply
Message 1 of 6
FOXINC
282 Views, 5 Replies

XREF SELECTION

in 04 you used to be able to select more than 1 xref to say bind all the xrefs... now in 07 i have to select each one...? isn't that a step back?

any clue?
chad
5 REPLIES 5
Message 2 of 6
areese9779
in reply to: FOXINC

Chad,

You should be able to select multiple drawings in the xref dialogue by using the shift or control keys. Once you have multiple drawings selected, right click, and the bind option will be there, allowing you to bind multiple drawings.
Andy Reese
C3D 2016, SP3
Dell Precision M4800, Windows 10 64-bit
Message 3 of 6
FOXINC
in reply to: FOXINC

yea that is how I did it in 04 but in 07 I can only select 1 xref. I have tried this on more than 1 of our machines.... is it just us?
Message 4 of 6
Anonymous
in reply to: FOXINC

FOXINC wrote:
> yea that is how I did it in 04 but in 07 I can only select 1 xref. I have tried this on more than 1 of our machines.... is it just us?

Are you in List view or Tree view? Tree view only allows you to select
one xref at a time, List view allows multiple. Check the buttons at the
top of the xref manager box.
Message 5 of 6
Anonymous
in reply to: FOXINC

Good call C.Groth!

Granted that LDT won't be going through any application revisions any more,
but the application it rides along with as a "vertical"?

That's quite a different story. 😮

You always need to review what's been changed in the "vanilla" application -
AutoCAD obviously.

Thanks again.

--
Don Reichle
"The only thing worse than training your staff, and having them leave is -
not training your staff, and having them stay." 😮
A reminder taken from Graphics Solution Providers' Calendar page
-------------------------- ------------------------------------------
!! Please discuss whatever we tell you with your SysMgr !!
!! They appreciate staying in the loop 🙂 !!

LDT-2K4
AMD Athlon64 2.2GHz 2GB RAM
XPPro 32bit SP2
WD Raptor 10K-rpm 37GB HD
Nvidia GeForce FX 5200 128MB

"The only Constant is Change".

"C.Groth" wrote in message
news:5563716@discussion.autodesk.com...
FOXINC wrote:
> yea that is how I did it in 04 but in 07 I can only select 1 xref. I have
> tried this on more than 1 of our machines.... is it just us?

Are you in List view or Tree view? Tree view only allows you to select
one xref at a time, List view allows multiple. Check the buttons at the
top of the xref manager box.
Message 6 of 6
FOXINC
in reply to: FOXINC

I was unaware of the option of tree or list that was the differance. thanks again guys.

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Autodesk Design & Make Report