Symbols for drainage/Slope

[Anonymous]

Can LDT 2006 automatically create those little slope drainage lines on the
sides of levee banks in my plan or do I have to create them manually and
array or copy?

[Anonymous]

In my experience with LDT 2K6 - and DynBlks of course - I'm fairly sure that
I either actually created/planned the creation of a DynBlk to handle that
KelWeg.

My preferred Block took on the shape of:

\ /
|

Where the lower portion of the "Y" was the Stretch-able portion of the
DynBlk.

And the upper portion could also be allowed to Shrink/Expand as Slopes went
through successive revisions.

Does that sound along the lines of what you might be after?

Pun intended. 😉

--
Don Reichle
"The only thing worse than training your staff, and having them leave is -
not training your staff, and having them stay." 😮
A reminder taken from Graphics Solution Providers' Calendar page
--------------------------------------------------------------------
!! Please discuss whatever we tell you with your SysMgr !!
!! They appreciate staying in the loop 🙂 !!

LDT/CD-2K4 - SP 2
AMD Athlon 64 X2 Dual-Core 3800+ 2.01GHz
XP-Pro 32bit SP2
2GB RAM
Dual WD800JD Hard Drives - 149GB Nvidia Stripe
Nvidia Quadro FX 1300 128MB
Dual ViewSonic 19-inch VA902b monitors

"The only Constant is Change".


"KelWeg" wrote in message
news:5318646@discussion.autodesk.com...
Can LDT 2006 automatically create those little slope drainage lines on the
sides of levee banks in my plan or do I have to create them manually and
array or copy?

[Anonymous]

Hi KelWeg
1. Possibly, a user defined slope range would do it for you?
2. You could make a temporary boundary around your levee to only show the
slope arrows you want.
3. Check out Don's advice

Joe

"KelWeg" wrote in message
news:5318646@discussion.autodesk.com...
Can LDT 2006 automatically create those little slope drainage lines on the
sides of levee banks in my plan or do I have to create them manually and
array or copy?

[Anonymous]

Yes that will work. I just wanted to be sure that there was not already a
symbol inside of LDT like the break-line symbol inside of Express tools.

"Don Reichle" wrote in message
news:5318675@discussion.autodesk.com...
In my experience with LDT 2K6 - and DynBlks of course - I'm fairly sure that
I either actually created/planned the creation of a DynBlk to handle that
KelWeg.

My preferred Block took on the shape of:

\ /
|

Where the lower portion of the "Y" was the Stretch-able portion of the
DynBlk.

And the upper portion could also be allowed to Shrink/Expand as Slopes went
through successive revisions.

Does that sound along the lines of what you might be after?

Pun intended. 😉

--
Don Reichle
"The only thing worse than training your staff, and having them leave is -
not training your staff, and having them stay." 😮
A reminder taken from Graphics Solution Providers' Calendar page
--------------------------------------------------------------------
!! Please discuss whatever we tell you with your SysMgr !!
!! They appreciate staying in the loop 🙂 !!

LDT/CD-2K4 - SP 2
AMD Athlon 64 X2 Dual-Core 3800+ 2.01GHz
XP-Pro 32bit SP2
2GB RAM
Dual WD800JD Hard Drives - 149GB Nvidia Stripe
Nvidia Quadro FX 1300 128MB
Dual ViewSonic 19-inch VA902b monitors

"The only Constant is Change".


"KelWeg" wrote in message
news:5318646@discussion.autodesk.com...
Can LDT 2006 automatically create those little slope drainage lines on the
sides of levee banks in my plan or do I have to create them manually and
array or copy?