Profile Station Labels

[mxtaylor49]

I am new to Land Desktop/Civil3D but have an in depth knowledge of InRoads (Bentley product). My question is when creating a profile how do i get the station call outs to be vertical, in a box, similar to the Ground Levels? I am using the two products above on AutoCAD 2005.

[Anonymous]

Hey mxtaylor49;

That's not going to be very easy to accomplish with Land Desktop Profiles.

I don't have very much hands-on experience with C3D, but "think" you would
have a greater degree of success with Profiles on that platform.

You might be able to catch Laurie Comerford over on the C3D Discussion Group
during these hours, as he resides in Eastern Australia.

I saw that you posted a topic over there, so check that forum for a likely
response from him.

--
Don Reichle
"The only thing worse
than training your staff,
and having them leave is -
not training your staff,
and having them stay."
Courtesy Graphics Solution Providers
----------------------------------------------------------
LDT/CD-2K4
AMD Athlon 64 X2 Dual 2.01GHz
XPPro 32bit SP2
2GB RAM
Dual WD800JD Hard Drives - 149GB Nvidia Stripe
Nvidia Quadro FX 1300 128MB
Dual ViewSonic 19-inch VA902b monitors


wrote in message news:5185575@discussion.autodesk.com...
I am new to Land Desktop/Civil3D but have an in depth knowledge of InRoads
(Bentley product). My question is when creating a profile how do i get the
station call outs to be vertical, in a box, similar to the Ground Levels? I
am using the two products above on AutoCAD 2005.

[mxtaylor49]

Thanks for the response. I realized after i posted it that it should have been in the C3D listings.
Cheers,
Mike