Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
our horizontal scale is set to 1"=40'
When the labels come in for manholes in our profiles, they come in by
default, 40 feet above the rim. Is there any way to change the offset for
the label to come in? That's alot of labels to move manually.
I suspect you did not use "Restore Text Areas" prior to labeling.
Bill
"Robert J." wrote in message
news:5008224@discussion.autodesk.com...
our horizontal scale is set to 1"=40'
When the labels come in for manholes in our profiles, they come in by
default, 40 feet above the rim. Is there any way to change the offset for
the label to come in? That's alot of labels to move manually.
I suspect I've never even heard of that. I need to know where to set and/or
change the default offsets for manhole labeling within profiles...
"wfb" wrote in message
news:5008512@discussion.autodesk.com...
I suspect you did not use "Restore Text Areas" prior to labeling.
Bill
"Robert J." wrote in message
news:5008224@discussion.autodesk.com...
our horizontal scale is set to 1"=40'
When the labels come in for manholes in our profiles, they come in by
default, 40 feet above the rim. Is there any way to change the offset for
the label to come in? That's alot of labels to move manually.
It is on the same drop down when you plot finish profile. What this means
is that someone previously labeled the profile
and it records this location. When re-labeling it tries not to use the same
space. (Beats the hell out of me!)
Bill
"Robert J." wrote in message
news:5008634@discussion.autodesk.com...
I suspect I've never even heard of that. I need to know where to set and/or
change the default offsets for manhole labeling within profiles...
"wfb" wrote in message
news:5008512@discussion.autodesk.com...
I suspect you did not use "Restore Text Areas" prior to labeling.
Bill
"Robert J." wrote in message
news:5008224@discussion.autodesk.com...
our horizontal scale is set to 1"=40'
When the labels come in for manholes in our profiles, they come in by
default, 40 feet above the rim. Is there any way to change the offset for
the label to come in? That's alot of labels to move manually.
I like my structure label , with in reason, at the
save elevation on the profile. So, I move one set to the desired elevation on
the profile, copy the Y corrdinate to the clipboard, isolates the text layer,
right click , properties and paste the Y coordinate in
![Autodesk Design & Make Report](https://forums.autodesk.com/t5/image/serverpage/image-id/1350519iCB55845EBFC43016/image-size/large?v=v2&px=999" "Autodesk Design & Make Report")