AutoCAD Land Desktop (Read Only)
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Problems Inserting Geotiffs

1 REPLY 1
Reply
Message 1 of 2
rkmin
716 Views, 1 Reply

Problems Inserting Geotiffs

I'm running a Windows 7 64-bit system with Autocad Civil 3D 2009 Land Desktop Companion and when I try to insert a Geotiff through the "Map" pull-down menu, I get the following error:

 

Cannot open frame

File: .\AcMapCoordinateTransform.cpp

Date: Feb 3 2009

Line: 221

 

 

I used to be able to insert the same Geotiffs on my Windows XP 32-bit running the same version of Autocad.

1 REPLY 1
Message 2 of 2
tompkins
in reply to: rkmin

look at this thread

 

http://forums.autodesk.com/t5/autocad-land-desktop/autodesk-raster-design-2009-error/td-p/3159400

 

we do what it suggests, insert the image, save the file, exit autocad, reset the shortcut back to the original setting (there are other problems later if you dont), the restart autocad.  once the image is in the drawing you are fine.

 

good luck.

Randy Tompkins, PSM
Degrove Surveyors

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Autodesk Design & Make Report