AutoCAD Land Desktop

AutoCAD Land Desktop

Reply
Member
Jesse-Designer
Posts: 3
Registered: ‎06-09-2004
Message 1 of 10 (2,206 Views)

Paper Space Polylines Display

2206 Views, 9 Replies
06-09-2004 09:10 AM
Hi. I'm looking for a setting that controls the display on paper space for polylines. When I go from model space to paper space the polyline widths are shown as hollow, not filled. I have tried numerous settings but no luck.

The polylines show up in model space but not in paper space.

thanks,

jesse
*Joe bouza
Message 2 of 10 (2,206 Views)

Re: Paper Space Polylines Display

06-09-2004 09:12 AM in reply to: Jesse-Designer
Hollow? Maybe what you want is lintype generation = enabled Joe "Jesse-Designer" wrote in message news:3226828.1086797445233.JavaMail.jive@jiveforum1.autodesk.com... > Hi. I'm looking for a setting that controls the display on paper space for polylines. When I go from model space to paper space the polyline widths are shown as hollow, not filled. I have tried numerous settings but no luck. > > The polylines show up in model space but not in paper space. > > thanks, > > jesse
*Karl Fuls
Message 3 of 10 (2,206 Views)

Re: Paper Space Polylines Display

06-09-2004 09:40 AM in reply to: Jesse-Designer
Fillmode Type: Integer Saved in: Drawing Initial value: 1 Specifies whether hatches (including solid fills and gradient fills), two-dimensional solids, and wide polylines are filled in. 0 Objects are not filled 1 Objects are filled If the plines have a linetype, make sure PSLTSCALE is set to 0. -- Karl Fuls PLS Autocad AEC Training and Consulting Autodesk Discussion Group Facilitator Joe bouza wrote: > Hollow? > > Maybe what you want is lintype generation = enabled > > Joe > "Jesse-Designer" wrote in message > news:3226828.1086797445233.JavaMail.jive@jiveforum1.autodesk.com... > >>Hi. I'm looking for a setting that controls the display on paper space > > for polylines. When I go from model space to paper space the polyline > widths are shown as hollow, not filled. I have tried numerous settings but > no luck. > >>The polylines show up in model space but not in paper space. >> >>thanks, >> >>jesse > > >
*Joe bouza
Message 4 of 10 (2,206 Views)

Re: Paper Space Polylines Display

06-09-2004 09:54 AM in reply to: Jesse-Designer
Thanks Karl Joe "Karl Fuls" wrote in message news:40c73d69$1_2@newsprd01... > Fillmode > > Type: Integer > Saved in: Drawing > Initial value: 1 > > Specifies whether hatches (including solid fills and gradient fills), > two-dimensional solids, and wide polylines are filled in. > > > 0 Objects are not filled > > 1 Objects are filled > > If the plines have a linetype, make sure PSLTSCALE is set to 0. > > -- > Karl Fuls PLS > Autocad AEC Training and Consulting > Autodesk Discussion Group Facilitator > > Joe bouza wrote: > > > Hollow? > > > > Maybe what you want is lintype generation = enabled > > > > Joe > > "Jesse-Designer" wrote in message > > news:3226828.1086797445233.JavaMail.jive@jiveforum1.autodesk.com... > > > >>Hi. I'm looking for a setting that controls the display on paper space > > > > for polylines. When I go from model space to paper space the polyline > > widths are shown as hollow, not filled. I have tried numerous settings but > > no luck. > > > >>The polylines show up in model space but not in paper space. > >> > >>thanks, > >> > >>jesse > > > > > > >
*Joe bouza
Message 5 of 10 (2,206 Views)

Re: Paper Space Polylines Display

06-09-2004 09:57 AM in reply to: Jesse-Designer
Hi Karl, no chance that can be set by entity, would there? Joe "Karl Fuls" wrote in message news:40c73d69$1_2@newsprd01... > Fillmode > > Type: Integer > Saved in: Drawing > Initial value: 1 > > Specifies whether hatches (including solid fills and gradient fills), > two-dimensional solids, and wide polylines are filled in. > > > 0 Objects are not filled > > 1 Objects are filled > > If the plines have a linetype, make sure PSLTSCALE is set to 0. > > -- > Karl Fuls PLS > Autocad AEC Training and Consulting > Autodesk Discussion Group Facilitator > > Joe bouza wrote: > > > Hollow? > > > > Maybe what you want is lintype generation = enabled > > > > Joe > > "Jesse-Designer" wrote in message > > news:3226828.1086797445233.JavaMail.jive@jiveforum1.autodesk.com... > > > >>Hi. I'm looking for a setting that controls the display on paper space > > > > for polylines. When I go from model space to paper space the polyline > > widths are shown as hollow, not filled. I have tried numerous settings but > > no luck. > > > >>The polylines show up in model space but not in paper space. > >> > >>thanks, > >> > >>jesse > > > > > > >
Member
Jesse-Designer
Posts: 3
Registered: ‎06-09-2004
Message 6 of 10 (2,206 Views)

Re: Paper Space Polylines Display

06-09-2004 11:27 AM in reply to: Jesse-Designer
I have tried that....when in model space the polylines are shown as solid. when in paper space the polylines are shown as hollow polylines. I have changed numerous settings from lweight, lwt on status bar, options (plotting),lwdisplay. I really don't know what else it could be.

jesse
*James Wedding
Message 7 of 10 (2,206 Views)

Re: Paper Space Polylines Display

06-09-2004 11:48 AM in reply to: Jesse-Designer
Is your viewport in HIDE? It could also be that your viewport is not in standard World-Plan view. That would cause the same problem. -- James Wedding, P.E. IT Manager Jones & Boyd, Inc. Dallas, TX XP/1 on P4-3.4/1G LDT2004&5+C3D Troll :a slang term for a person who posts messages without contributory content, simply intended to incite conflict. http://wikipedia.com
Member
Jesse-Designer
Posts: 3
Registered: ‎06-09-2004
Message 8 of 10 (2,206 Views)

Re: Paper Space Polylines Display

06-09-2004 12:03 PM in reply to: Jesse-Designer
James,

yes i have already checked for that. I finally just started over and by doing so, it fixed the problem. It was very strange and in only 5 of my drawings had the same problem. How is Luke Peters doing? He is a friend of mine.

Thanks for your input.

Jesse
*James Wedding
Message 9 of 10 (2,206 Views)

Re: Paper Space Polylines Display

06-09-2004 12:11 PM in reply to: Jesse-Designer
He's doing great. Under the gun and performing admirably. -- James Wedding, P.E. IT Manager Jones & Boyd, Inc. Dallas, TX XP/1 on P4-3.4/1G LDT2004&5+C3D Troll :a slang term for a person who posts messages without contributory content, simply intended to incite conflict. http://wikipedia.com
New Member
papa2ten
Posts: 1
Registered: ‎04-06-2011
Message 10 of 10 (1,990 Views)

Re: Paper Space Polylines Display

04-06-2011 08:02 AM in reply to: Jesse-Designer

Solution for ACAD LT 2009:
delete and re-layout viewport in paperspace.

Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.