Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
I have already created my pipe run and my profile. I had forgotten to change the pipe size in the pipe settings before doing this so all of my pipes in the run came out at 8" when they should be 12". Is there and "easy" way to fix this. It seems like you should be able to edit data and change the pipe size number to 12", but it woun't allow me to do this. I might just be totally missing something obvious. Thanks, Amanda
you might need to turn off the automatic pipe sizing and or calculation...
iirc that should allow you to edit the data, post run creation.
jjd
wrote in message news:5986972@discussion.autodesk.com...
I have already created my pipe run and my profile. I had forgotten to change
the pipe size in the pipe settings before doing this so all of my pipes in
the run came out at 8" when they should be 12". Is there and "easy" way to
fix this. It seems like you should be able to edit data and change the pipe
size number to 12", but it woun't allow me to do this. I might just be
totally missing something obvious. Thanks, Amanda
![Autodesk Design & Make Report](https://forums.autodesk.com/t5/image/serverpage/image-id/1350519iCB55845EBFC43016/image-size/large?v=v2&px=999" "Autodesk Design & Make Report")