And, depending on the version, every time you reload the drawing, or
edits drawing setup, it will change the global ltscale back to the
drawing scale you have set.
--
Karl M. Fuls PLS
Autodesk Discussion Group Facilitator
neilw wrote:
> A good rule of thumb:
>
> Always leave the linetype scale for individual lines at 1.0 unless
> circumstances require otherwise (i.e. working with a mixture of ISO/Imperial
> linetypes) and global LTSCALE=1.
>
> In your case, reset all lines to 1 and try setting LTSCALE=1 & PSLTSCALE=1.
>
> Your linetypes will not display in model space this way, but will show
> properly in PS.
>
> wrote in message news:5026250@discussion.autodesk.com...
> I have a map With a veiwport scale to 1"=100', i can't get the proper scale
> for dashed lines or center lines on xref's right to scale with the drawing,
> im wondering if there is a command to auto scale so that when im in
> papespace is auto scales 1"=100'. do i have to set the global scale facter
> to something. i tried setting it to 100, but the linetype isn't the correct
> scale, but if i change the linetype property on the line to .01 i see
> dashes, but i need it to remain 1 so that the scale is proper. any help
> please?