LandXML export error

[ChazBraz]

When I try to run LandXML Export, it gives me an Error AutoCAD aborting dialog with the UAV exception, with an address of 30b216f6h. I have both LDDT 07 and 08 and Civil 3D 07 and 08, and I get the same error in all of them. Have all current SPs. Have attached a screen capture. Any ideas?
Thanks,
Charles

[Anonymous]

What are you trying to export?

Are you exporting many objects? If so try to do one at a time to see if a
single object is the culprit.



--
John Mayo
Project Engineer
Conklin Associates
Ramsey, NJ

Civil 3D 2008, LDT 2008, Raster Design 2008
P-IV at 3.5 GHz
2 GB Ram
Nvidea Quadro FX w/ 128 MB Ram
wrote in message news:5709772@discussion.autodesk.com...
When I try to run LandXML Export, it gives me an Error AutoCAD aborting
dialog with the UAV exception, with an address of 30b216f6h. I have both
LDDT 07 and 08 and Civil 3D 07 and 08, and I get the same error in all of
them. Have all current SPs. Have attached a screen capture. Any ideas?
Thanks,
Charles

[ChazBraz]

I want to just export pipe runs, but it never even loads the routine - the error occurs during initializing

[Anonymous]

Can you reproduce this in other projects? I would try to reproduce it with a
simple pipe run in a new project & new dwg.

--
John Mayo
Project Engineer
Conklin Associates
Ramsey, NJ

Civil 3D 2008, LDT 2008, Raster Design 2008
P-IV at 3.5 GHz
2 GB Ram
Nvidea Quadro FX w/ 128 MB Ram
wrote in message news:5710931@discussion.autodesk.com...
I want to just export pipe runs, but it never even loads the routine - the
error occurs during initializing

[Anonymous]

...and if you can reproduce it I would repair my LDT installation.

If it worked I would try importing the pipe runs into a new, blank dwg & try
to export XML.

--
John Mayo
Project Engineer
Conklin Associates
Ramsey, NJ

Civil 3D 2008, LDT 2008, Raster Design 2008
P-IV at 3.5 GHz
2 GB Ram
Nvidea Quadro FX w/ 128 MB Ram
"John Mayo" wrote in message
news:5711059@discussion.autodesk.com...
Can you reproduce this in other projects? I would try to reproduce it with a
simple pipe run in a new project & new dwg.

--
John Mayo
Project Engineer
Conklin Associates
Ramsey, NJ

Civil 3D 2008, LDT 2008, Raster Design 2008
P-IV at 3.5 GHz
2 GB Ram
Nvidea Quadro FX w/ 128 MB Ram
wrote in message news:5710931@discussion.autodesk.com...
I want to just export pipe runs, but it never even loads the routine - the
error occurs during initializing

[ChazBraz]

Seemed to work with new drawing and project. I'll may just need to recreate the runs. I appreciate your help
Charles

[Anonymous]

No problem Charles.

I would import the defined runs (from the pipes menu) in a new dwg before
recreating them. If this is an error in the dwg & not the pipe run you may
get the error again if you recreate the runs in the same dwg.

--
John Mayo
Project Engineer
Conklin Associates
Ramsey, NJ

Civil 3D 2008, LDT 2008, Raster Design 2008
P-IV at 3.5 GHz
2 GB Ram
Nvidea Quadro FX w/ 128 MB Ram
wrote in message news:5711283@discussion.autodesk.com...
Seemed to work with new drawing and project. I'll may just need to recreate
the runs. I appreciate your help
Charles

[ChazBraz]

Good idea!
Thanks