Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
"doug k" wrote in message
news:5061651@discussion.autodesk.com...
yeah, that weasley voice, poor posture, false machismo, the way his eyes
bugged out when he got mad.
funny stuff, especially when Andy would threaten to take his one bullet
away.
"Joe Bouza" wrote in message
news:5061638@discussion.autodesk.com...
I sure miss Don How bout you?
IIRC he took a new job in Arizona (quite a climate change from the Seattle
area) and I think he's been seen here a few times since his move....here's a
snip from one of his last posts in Oct. '05:
OK - I know I've entitled myself "King of Work-Arounds", but I've just
crossed over into the land of 2006 at a new firm I've joined last week
HTH,
Jeff
"James Wedding" wrote in message
news:5061760@discussion.autodesk.com...
Wow, I have to admit that I hadn't thought about it, but he has gone AWOL.
Someone who knows care to fill me in? Wedding over at gmail.
no way.. is this the neil i know that knows luke s.?
how did i never realize it was you? u hope i have not been a but head
unintentionally... or on purpose. or ... did sec get a new neil i don't
know? any how hello zonie- geez small world- i am in cottonwood-
and don- good to see you here- sorry my place was so indecisive... i am
still trying to keep my head above water... now that i think about it... you
wouldn't have abrother names kurt would you? a general contractor? we did
some work with him in sedona az several years ago. same last name- and that
seems to not be a very common name.
well any how- nice to virtualy meet you both again or for the first time-
perhaps our paths will cross-
jessed-drafter
"Neil W" wrote in message
news:5061969@discussion.autodesk.com...
Welcome to AZ mate. Where are you located? (Sedona here).
wrote in message news:5061938@discussion.autodesk.com...
Yes, and yours wasn't the only one I received today. 🙂
It's been "nose to the grindstone" for the past quarter. Things have just
about calmed down enough for me to join the fray once more.
I can hear it already...
"There goes the neighborhood!"
It will remain to be seen how much I can inhabit these "old haunts", since
my recent job change.
My fellow dry and warm Arizonans - I'm in North Central Phoenix.
After reading through a recent weather report about the 11-year drought, but remembering old news stories about the "downpours" in the past, I'm hoping that I've brought some of the Northwest's weather patterns with me. Seattle is looking at breaking their old record for rain in about two weeks.
And since this thread was started on a " off-topic" subject, I don't feel the slightest remorse for continuing it's vein. 🙂
Yes I work with Luke S, but I am not the Neil you probably meant. I came to
SEC last March from N . Dakota. I take it you are the Jesse that Luke used
to work with at Pender? If so he has mentioned you a few times in context
with Don P. and his "mellow personality". Anyway, I am the 2nd Neil here so
I go by Wil.
I'll mention to Luke that I've seen your posts over the years.
"jd-drafter@home" wrote in message
news:5062031@discussion.autodesk.com...
neil? from sedona?
no way.. is this the neil i know that knows luke s.?
how did i never realize it was you? u hope i have not been a but head
unintentionally... or on purpose. or ... did sec get a new neil i don't
know? any how hello zonie- geez small world- i am in cottonwood-
and don- good to see you here- sorry my place was so indecisive... i am
still trying to keep my head above water... now that i think about it... you
wouldn't have abrother names kurt would you? a general contractor? we did
some work with him in sedona az several years ago. same last name- and that
seems to not be a very common name.
well any how- nice to virtualy meet you both again or for the first time-
perhaps our paths will cross-
jessed-drafter
"Neil W" wrote in message
news:5061969@discussion.autodesk.com...
Welcome to AZ mate. Where are you located? (Sedona here).
wrote in message news:5061938@discussion.autodesk.com...
Yes, and yours wasn't the only one I received today. 🙂
It's been "nose to the grindstone" for the past quarter. Things have just
about calmed down enough for me to join the fray once more.
I can hear it already...
"There goes the neighborhood!"
It will remain to be seen how much I can inhabit these "old haunts", since
my recent job change.
I'm getting tired of the perfect weather...bring on the rain!
wrote in message news:5062290@discussion.autodesk.com...
My fellow dry and warm Arizonans - I'm in North Central Phoenix.
After reading through a recent weather report about the 11-year drought, but
remembering old news stories about the "downpours" in the past, I'm hoping
that I've brought some of the Northwest's weather patterns with me. Seattle
is looking at breaking their old record for rain in about two weeks.
And since this thread was started on a " off-topic" subject, I don't feel
the slightest remorse for continuing it's vein. 🙂
>"Neil W" wrote in message
> >news:5062296@discussion.autodesk.com...
>Hey Jesse,
>Yes I work with Luke S, but I am not the Neil you probably meant. I came to
>SEC last March from N . Dakota. I take it you are the Jesse that Luke used
>to work with at Pender?
yep- small world-
>If so he has mentioned you a few times in context with Don P. and his
>"mellow >personality".
ah yes... the personality... daily-
>Anyway, I am the 2nd Neil here so I go by Wil.
i think i heard something like that once- maybe from bill "the structural
guy" k.
>I'll mention to Luke that I've seen your posts over the years.
well i hope it's all good- i try to help when i can and just read when i
can't-
by the way- were you around in the days of 'take5'? or wise in the ways of
the husquavarna?
![Autodesk Design & Make Report](https://forums.autodesk.com/t5/image/serverpage/image-id/1350519iCB55845EBFC43016/image-size/large?v=v2&px=999" "Autodesk Design & Make Report")