AutoCAD Land Desktop

AutoCAD Land Desktop

Reply
Contributor
kspeters
Posts: 19
Registered: ‎02-25-2004
Message 1 of 11 (1,960 Views)

How do I make a "double line" linetype?

1960 Views, 10 Replies
03-07-2006 01:21 PM
I want to make a custom linetype that will draw a dual line in parallel that I could input a certain distance apart. Is this possible? If so, could someone assist me?
*doug k
Message 2 of 11 (1,959 Views)

Re: How do I make a "double line" linetype?

03-07-2006 01:29 PM in reply to: kspeters
does it need to curve?

--
Doug K
LDT 2005, XP Pro 2002 sp2, P4 2.40GHz, 1 GB RAM, Dual 19" Dell LCD, NVIDIA
GeForce FX 5700LE, Left Handed Kensington Trackball, Happily Married
w/Children



wrote in message news:5104248@discussion.autodesk.com...
I want to make a custom linetype that will draw a dual line in parallel that
I could input a certain distance apart. Is this possible? If so, could
someone assist me?
*John Mayo
Message 3 of 11 (1,959 Views)

Re: How do I make a "double line" linetype?

03-07-2006 01:36 PM in reply to: kspeters
Here is a definition & shp file we use. It will do curves but there will be
dots along the centerline.


*SANSEWER,Sanitary Sewer
A,0,-.125,[EQUAL,EQUAL,s=.27],-.125


John
*doug k
Message 4 of 11 (1,959 Views)

Re: How do I make a "double line" linetype?

03-07-2006 01:42 PM in reply to: kspeters
interesting idea, but that is using a shape file, yes?

--
Doug K
LDT 2005, XP Pro 2002 sp2, P4 2.40GHz, 1 GB RAM, Dual 19" Dell LCD, NVIDIA
GeForce FX 5700LE, Left Handed Kensington Trackball, Happily Married
w/Children



"John Mayo" wrote in message
news:5104251@discussion.autodesk.com...
Here is a definition & shp file we use. It will do curves but there will be
dots along the centerline.


*SANSEWER,Sanitary Sewer
A,0,-.125,[EQUAL,EQUAL,s=.27],-.125


John
*doug k
Message 5 of 11 (1,959 Views)

Re: How do I make a "double line" linetype?

03-07-2006 01:45 PM in reply to: kspeters
crud, never mind, I see the shape file now.

--
Doug K
LDT 2005, XP Pro 2002 sp2, P4 2.40GHz, 1 GB RAM, Dual 19" Dell LCD, NVIDIA
GeForce FX 5700LE, Left Handed Kensington Trackball, Happily Married
w/Children



"doug k" wrote in message
news:5104265@discussion.autodesk.com...
interesting idea, but that is using a shape file, yes?
*Don Reichle
Message 6 of 11 (1,959 Views)

Re: How do I make a "double line" linetype?

03-07-2006 01:55 PM in reply to: kspeters
And along the lines of Doug's query, you can use Multilines as long as you
don't mind "chorded" curves.

I thought I had mine "handy" but after a few minutes searching the DG... I
can provide a fairly well-rounded sample near the bottom of this thread in
the Zip file;
http://tinyurl.com/nmbrl

Read through that thread for multiline's limitations - mainly curvature.

HTH

--
Don Reichle
"The only thing worse
than training your staff,
and having them leave is -
not training your staff,
and having them stay."
Courtesy Graphics Solution Providers
----------------------------------------------------------
C3D/LDT/CD/SVY-2K6
Intel P4-3.00GHz
XPPro 32bit SP2
1GB RAM
Nvidia GeForce2 Ti 64MB


"John Mayo" wrote in message
news:5104251@discussion.autodesk.com...
Here is a definition & shp file we use. It will do curves but there will be
dots along the centerline.


*SANSEWER,Sanitary Sewer
A,0,-.125,[EQUAL,EQUAL,s=.27],-.125


John
*Joe Bouza
Message 7 of 11 (1,959 Views)

Re: How do I make a "double line" linetype?

03-07-2006 02:24 PM in reply to: kspeters
Hi Don, I grabbed your Linetype files from an earlier post. Nice work.

Joe


"Don Reichle" wrote in message
news:5104284@discussion.autodesk.com...
And along the lines of Doug's query, you can use Multilines as long as you
don't mind "chorded" curves.

I thought I had mine "handy" but after a few minutes searching the DG... I
can provide a fairly well-rounded sample near the bottom of this thread in
the Zip file;
http://tinyurl.com/nmbrl

Read through that thread for multiline's limitations - mainly curvature.

HTH

--
Don Reichle
"The only thing worse
than training your staff,
and having them leave is -
not training your staff,
and having them stay."
Courtesy Graphics Solution Providers
----------------------------------------------------------
C3D/LDT/CD/SVY-2K6
Intel P4-3.00GHz
XPPro 32bit SP2
1GB RAM
Nvidia GeForce2 Ti 64MB


"John Mayo" wrote in message
news:5104251@discussion.autodesk.com...
Here is a definition & shp file we use. It will do curves but there will be
dots along the centerline.


*SANSEWER,Sanitary Sewer
A,0,-.125,[EQUAL,EQUAL,s=.27],-.125


John
*Don Reichle
Message 8 of 11 (1,959 Views)

Re: How do I make a "double line" linetype?

03-07-2006 02:50 PM in reply to: kspeters
Thanks for the compliment Joe.

I'm glad to be of help.

--
Don Reichle
"The only thing worse
than training your staff,
and having them leave is -
not training your staff,
and having them stay."
Courtesy Graphics Solution Providers
----------------------------------------------------------
C3D/LDT/CD/SVY-2K6
Intel P4-3.00GHz
XPPro 32bit SP2
1GB RAM
Nvidia GeForce2 Ti 64MB


"Joe Bouza" wrote in message
news:5104333@discussion.autodesk.com...
Hi Don, I grabbed your Linetype files from an earlier post. Nice work.

Joe


"Don Reichle" wrote in message
news:5104284@discussion.autodesk.com...
And along the lines of Doug's query, you can use Multilines as long as you
don't mind "chorded" curves.

I thought I had mine "handy" but after a few minutes searching the DG... I
can provide a fairly well-rounded sample near the bottom of this thread in
the Zip file;
http://tinyurl.com/nmbrl

Read through that thread for multiline's limitations - mainly curvature.

HTH

--
Don Reichle
"The only thing worse
than training your staff,
and having them leave is -
not training your staff,
and having them stay."
Courtesy Graphics Solution Providers
----------------------------------------------------------
C3D/LDT/CD/SVY-2K6
Intel P4-3.00GHz
XPPro 32bit SP2
1GB RAM
Nvidia GeForce2 Ti 64MB


"John Mayo" wrote in message
news:5104251@discussion.autodesk.com...
Here is a definition & shp file we use. It will do curves but there will be
dots along the centerline.


*SANSEWER,Sanitary Sewer
A,0,-.125,[EQUAL,EQUAL,s=.27],-.125


John
*Joe Bouza
Message 9 of 11 (1,959 Views)

Re: How do I make a "double line" linetype?

03-07-2006 02:55 PM in reply to: kspeters
That file is pretty extensive obviously not one days work. And it reflects
the passion in which you address issues here on the NG.

Thanks for sharing, and the compliments come easy when well deserved

Joe


"Don Reichle" wrote in message
news:5104354@discussion.autodesk.com...
Thanks for the compliment Joe.

I'm glad to be of help.

--
Don Reichle
"The only thing worse
than training your staff,
and having them leave is -
not training your staff,
and having them stay."
Courtesy Graphics Solution Providers
----------------------------------------------------------
C3D/LDT/CD/SVY-2K6
Intel P4-3.00GHz
XPPro 32bit SP2
1GB RAM
Nvidia GeForce2 Ti 64MB


"Joe Bouza" wrote in message
news:5104333@discussion.autodesk.com...
Hi Don, I grabbed your Linetype files from an earlier post. Nice work.

Joe


"Don Reichle" wrote in message
news:5104284@discussion.autodesk.com...
And along the lines of Doug's query, you can use Multilines as long as you
don't mind "chorded" curves.

I thought I had mine "handy" but after a few minutes searching the DG... I
can provide a fairly well-rounded sample near the bottom of this thread in
the Zip file;
http://tinyurl.com/nmbrl

Read through that thread for multiline's limitations - mainly curvature.

HTH

--
Don Reichle
"The only thing worse
than training your staff,
and having them leave is -
not training your staff,
and having them stay."
Courtesy Graphics Solution Providers
----------------------------------------------------------
C3D/LDT/CD/SVY-2K6
Intel P4-3.00GHz
XPPro 32bit SP2
1GB RAM
Nvidia GeForce2 Ti 64MB


"John Mayo" wrote in message
news:5104251@discussion.autodesk.com...
Here is a definition & shp file we use. It will do curves but there will be
dots along the centerline.


*SANSEWER,Sanitary Sewer
A,0,-.125,[EQUAL,EQUAL,s=.27],-.125


John
*Don Reichle
Message 10 of 11 (1,959 Views)

Re: How do I make a "double line" linetype?

03-07-2006 04:16 PM in reply to: kspeters
Passion?

Moi? :-)

--
Don Reichle
"The only thing worse
than training your staff,
and having them leave is -
not training your staff,
and having them stay."
Courtesy Graphics Solution Providers
----------------------------------------------------------
C3D/LDT/CD/SVY-2K6
Intel P4-3.00GHz
XPPro 32bit SP2
1GB RAM
Nvidia GeForce2 Ti 64MB


"Joe Bouza" wrote in message
news:5104356@discussion.autodesk.com...
That file is pretty extensive obviously not one days work. And it reflects
the passion in which you address issues here on the NG.

Thanks for sharing, and the compliments come easy when well deserved

Joe


"Don Reichle" wrote in message
news:5104354@discussion.autodesk.com...
Thanks for the compliment Joe.

I'm glad to be of help.

--
Don Reichle
"The only thing worse
than training your staff,
and having them leave is -
not training your staff,
and having them stay."
Courtesy Graphics Solution Providers
----------------------------------------------------------
C3D/LDT/CD/SVY-2K6
Intel P4-3.00GHz
XPPro 32bit SP2
1GB RAM
Nvidia GeForce2 Ti 64MB


"Joe Bouza" wrote in message
news:5104333@discussion.autodesk.com...
Hi Don, I grabbed your Linetype files from an earlier post. Nice work.

Joe


"Don Reichle" wrote in message
news:5104284@discussion.autodesk.com...
And along the lines of Doug's query, you can use Multilines as long as you
don't mind "chorded" curves.

I thought I had mine "handy" but after a few minutes searching the DG... I
can provide a fairly well-rounded sample near the bottom of this thread in
the Zip file;
http://tinyurl.com/nmbrl

Read through that thread for multiline's limitations - mainly curvature.

HTH

--
Don Reichle
"The only thing worse
than training your staff,
and having them leave is -
not training your staff,
and having them stay."
Courtesy Graphics Solution Providers
----------------------------------------------------------
C3D/LDT/CD/SVY-2K6
Intel P4-3.00GHz
XPPro 32bit SP2
1GB RAM
Nvidia GeForce2 Ti 64MB


"John Mayo" wrote in message
news:5104251@discussion.autodesk.com...
Here is a definition & shp file we use. It will do curves but there will be
dots along the centerline.


*SANSEWER,Sanitary Sewer
A,0,-.125,[EQUAL,EQUAL,s=.27],-.125


John
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.