AutoCAD Land Desktop

AutoCAD Land Desktop

Reply
Distinguished Contributor
LauraHendrix4022
Posts: 291
Registered: ‎05-16-2006
Message 1 of 8 (6,074 Views)
Accepted Solution

extend to apparent intersection

6074 Views, 7 Replies
05-17-2006 08:05 PM
At my former job my extend function would extend a line to the apparent intersection of another line. On my current computer the line will not extend unless it will actually intersect the chosen line. I was using 2004 before and am still using 2004. Is there a setting to change this?

Type Edgemode  and change the setting from 0 to 1

*John Coon
Message 2 of 8 (6,073 Views)

Re: extend to apparent intersection

05-18-2006 03:37 AM in reply to: LauraHendrix4022
Brian,

try setvar edgemode (1)

John Coon
wrote in message news:5178415@discussion.autodesk.com...
At my former job my extend function would extend a line to the apparent
intersection of another line. On my current computer the line will not
extend unless it will actually intersect the chosen line. I was using 2004
before and am still using 2004. Is there a setting to change this?
New Member
robertslewis
Posts: 2
Registered: ‎02-21-2012
Message 3 of 8 (5,711 Views)

Re: extend to apparent intersection

02-21-2012 12:56 PM in reply to: LauraHendrix4022

Type Edgemode  and change the setting from 0 to 1

*Expert Elite*
Jeff_M
Posts: 4,388
Registered: ‎07-22-2003
Message 4 of 8 (5,708 Views)

Re: extend to apparent intersection

02-21-2012 01:13 PM in reply to: robertslewis

I'll bet they figured something out in the 6 years since they asked that question...

Jeff_M, also a frequent Swamper
New Member
robertslewis
Posts: 2
Registered: ‎02-21-2012
Message 5 of 8 (5,706 Views)

Re: extend to apparent intersection

02-21-2012 01:29 PM in reply to: Jeff_M

I'm sure but it will be here for the next person searching for it as I was today.

 

Alumni
brian.kling
Posts: 181
Registered: ‎12-17-2002
Message 6 of 8 (5,697 Views)

Re: extend to apparent intersection

02-22-2012 09:50 AM in reply to: robertslewis

Good point Robert, thanks for posting!



Brian Kling
Community Strategist
Customer Service & Support
Autodesk, Inc.
New Member
riza16
Posts: 1
Registered: ‎04-03-2012
Message 7 of 8 (5,568 Views)

Re: extend to apparent intersection

04-03-2012 08:45 PM in reply to: LauraHendrix4022

great post.this is cool

New Member
MCollins12
Posts: 1
Registered: ‎04-10-2012
Message 8 of 8 (5,535 Views)

Re: extend to apparent intersection

04-15-2012 12:36 AM in reply to: riza16

Yeah..go for gold Autodesk!

Key West Real Estate
The Key West Real Estate with a custom sliding Cedar louver wall.


Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.