Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
I am using two different pipe sizes in my design (8" and 15"). I setup one pipe size for the 8" pipe and the changes I make for the 15" pipe shows up in the 8" pipe dfm file. I make the changes back to the 8" pipe and then the 15" shows the same as the 15" pipe. I used to do this all the time and for some reason the two different dfm's are over writing each other. I always import and export the dfm before working with the other. Am I missing a step somewhere in defining these two dfm's? I am using LDD 2006.
![Autodesk Design & Make Report](https://forums.autodesk.com/t5/image/serverpage/image-id/1350519iCB55845EBFC43016/image-size/large?v=v2&px=999" "Autodesk Design & Make Report")