AutoCAD Land Desktop (Read Only)
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Reply
Message 1 of 4
Anonymous
217 Views, 3 Replies

Crow's feet

Does anyone know how I can change the default size of the crow's feet that
are automatically drawn when you label a line or curve? I thought it
involved changing the block "pcor" which I tried but it didn't work.

Thanks for any thoughts you may have,

Craig
3 REPLIES 3
Message 2 of 4
Anonymous
in reply to: Anonymous

Hey Craig;

If you changed the Pcor block DWG down in the Land folder, you would need to
Insert it "by hand" so that it will ask if you want to Redefine. Otherwise
it will just reuse the Block that already resides in the DWG in question.

HTH

--
Don Reichle
"King Of Work-Arounds"
"The only thing worse
than training your staff,
and having them leave is -
not training your staff,
and having them stay."
Courtesy Graphics Solution Providers
--------------------------------------
LDT3/CD3
IntelP4-2.4
1GB RAM
Nvidia GeForce2 MX 32MB


"Craig H" wrote in message
news:4874741@discussion.autodesk.com...
Does anyone know how I can change the default size of the crow's feet that
are automatically drawn when you label a line or curve? I thought it
involved changing the block "pcor" which I tried but it didn't work.

Thanks for any thoughts you may have,

Craig
Message 3 of 4
Anonymous
in reply to: Anonymous

Hey Don

Yoooz ahn ya game tidaaay.



Joe
"Don Reichle" wrote in message
news:4874747@discussion.autodesk.com...
Hey Craig;

If you changed the Pcor block DWG down in the Land folder, you would need to
Insert it "by hand" so that it will ask if you want to Redefine. Otherwise
it will just reuse the Block that already resides in the DWG in question.

HTH

--
Don Reichle
"King Of Work-Arounds"
"The only thing worse
than training your staff,
and having them leave is -
not training your staff,
and having them stay."
Courtesy Graphics Solution Providers
--------------------------------------
LDT3/CD3
IntelP4-2.4
1GB RAM
Nvidia GeForce2 MX 32MB


"Craig H" wrote in message
news:4874741@discussion.autodesk.com...
Does anyone know how I can change the default size of the crow's feet that
are automatically drawn when you label a line or curve? I thought it
involved changing the block "pcor" which I tried but it didn't work.

Thanks for any thoughts you may have,

Craig
Message 4 of 4
Anonymous
in reply to: Anonymous

Tanks, Gumba.

--
Don Reichle
"King Of Work-Arounds"
"The only thing worse
than training your staff,
and having them leave is -
not training your staff,
and having them stay."
Courtesy Graphics Solution Providers
--------------------------------------
LDT3/CD3
IntelP4-2.4
1GB RAM
Nvidia GeForce2 MX 32MB


"Joe Bouza" wrote in message
news:4874878@discussion.autodesk.com...
Hey Don

Yoooz ahn ya game tidaaay.



Joe
"Don Reichle" wrote in message
news:4874747@discussion.autodesk.com...
Hey Craig;

If you changed the Pcor block DWG down in the Land folder, you would need to
Insert it "by hand" so that it will ask if you want to Redefine. Otherwise
it will just reuse the Block that already resides in the DWG in question.

HTH

--
Don Reichle
"King Of Work-Arounds"
"The only thing worse
than training your staff,
and having them leave is -
not training your staff,
and having them stay."
Courtesy Graphics Solution Providers
--------------------------------------
LDT3/CD3
IntelP4-2.4
1GB RAM
Nvidia GeForce2 MX 32MB


"Craig H" wrote in message
news:4874741@discussion.autodesk.com...
Does anyone know how I can change the default size of the crow's feet that
are automatically drawn when you label a line or curve? I thought it
involved changing the block "pcor" which I tried but it didn't work.

Thanks for any thoughts you may have,

Craig

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Autodesk Design & Make Report