Composite surface sources?

[Anonymous]

If I have a volume surface, is there a method or property that will tell me
the strata & DTM surfaces that were used to create it? I can't seem to find
any way to do this...

Jon Rizzo
Langan Engineering and Environmental Services, Inc.

[Anonymous]

Jon,

I haven't done much with volume surfaces, but I can't find anything either.
One solution would be to read the values directly from the surface .sdf
file. This is a text file that contains surface information. It is in the
surface folder with the same name as the surface. If it's a volume surface,
it contains the site and strata info as shown in the following example.

[Site]
SiteName=10359
[Strata]
StrataName=pregrade
Surface1=eg
Surface2=prop1

Are you familiar with reading info text files?

Glen

"Jon Rizzo" wrote in message
news:41CF19926615535A1904149ACEB6A3B2@in.WebX.maYIadrTaRb...
> If I have a volume surface, is there a method or property that will tell
me
> the strata & DTM surfaces that were used to create it? I can't seem to
find
> any way to do this...
>
> Jon Rizzo
> Langan Engineering and Environmental Services, Inc.
>
>
>

[Anonymous]

Thanks Glen! I think I can figure it out from there...

Jon

"Glen Albert" wrote in message
news:7482DCE05D176CC2BCA8774E3949EE51@in.WebX.maYIadrTaRb...
> Jon,
>
> I haven't done much with volume surfaces, but I can't find anything
either.
> One solution would be to read the values directly from the surface .sdf
> file. This is a text file that contains surface information. It is in the
> surface folder with the same name as the surface. If it's a volume
surface,
> it contains the site and strata info as shown in the following example.
>
> [Site]
> SiteName=10359
> [Strata]
> StrataName=pregrade
> Surface1=eg
> Surface2=prop1
>
> Are you familiar with reading info text files?
>
> Glen
>
> "Jon Rizzo" wrote in message
> news:41CF19926615535A1904149ACEB6A3B2@in.WebX.maYIadrTaRb...
> > If I have a volume surface, is there a method or property that will tell
> me
> > the strata & DTM surfaces that were used to create it? I can't seem to
> find
> > any way to do this...
> >
> > Jon Rizzo
> > Langan Engineering and Environmental Services, Inc.
> >
> >
> >
>
>