AutoCAD Freestyle

Reply
New Member
drewhinkle
Posts: 2
Registered: ‎01-24-2011
Message 1 of 3 (1,413 Views)
Accepted Solution

Mirroring Text

1413 Views, 2 Replies
01-24-2011 11:32 AM

I am trying to mirror text.  Specifically, turning an "S" into a backwards S.  When selecting the character, 8 nodes appear at the 4 corners:  4 inner and 4 outer nodes to be exact.  If you click & hold one of the outer/square nodes, you can drag it horizontally, creating a mirror image of the character.  However, once you release the node the character returns to normal.  How do you get around this and create a mirror image?  It is obvious that the function resides within the software code, but I am unable to find the command to do so. 

To mirror text:

1.select your text

2.right click on it and select ‘Create Symbol from Selection’

3.right click again and select Flip > Flip Horizontal

4.once you mirrored your text, delete the symbol you created in step 2 form Symbol Libraries > Custom Symbols

 

Hope this helps.

Product Support
avto
Posts: 270
Registered: ‎10-07-2008
Message 2 of 3 (1,411 Views)

Re: Mirroring Text

01-24-2011 12:40 PM in reply to: drewhinkle

To mirror text:

1.select your text

2.right click on it and select ‘Create Symbol from Selection’

3.right click again and select Flip > Flip Horizontal

4.once you mirrored your text, delete the symbol you created in step 2 form Symbol Libraries > Custom Symbols

 

Hope this helps.



Avto Chachava
Autodesk Product Support
Autodesk, Inc.
New Member
drewhinkle
Posts: 2
Registered: ‎01-24-2011
Message 3 of 3 (1,408 Views)

Re: Mirroring Text

01-24-2011 01:04 PM in reply to: avto

Thanks for the easy, prompt, and thorough response!

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.