When I try to use the Publish command it looks as though something is happening, and then nothing gets produced. I've experimented with all of the settings available (eg save to predefined location, open when complete, save as individual files,etc).Here is the output from my viewplotdetails after the fact:
Job: - Error(s) Did Not Plot
Job ID: 12
Sheet set name:
Date and time started: 5/7/2014 Wednesday, May 7, 2014 at 7:15:18 PM Pacific Daylight Time
Date and time completed: 5/7/2014 Wednesday, May 7, 2014 at 7:15:46 PM Pacific Daylight Time
UserID:
Profile ID: <<Unnamed Profile>>
Total sheets: 1
Sheets plotted: 0
Number of errors: 3
Number of warnings: 0

Sheet: 13013 L2 Materials and grading-L4 Details - Error(s) Did Not Plot
File: /Volumes/#####/2013/13-013 ##### /07-Drawings/13013 L2 Materials and grading.dwg
Category name:
Page setup:
Device name:
Plot file path:
Paper size:
ERROR: The PMP folder was not found and is required for custom paper size creation.
ERROR: Internal error attempting to create custom paper size.
ERROR: Unable to create the requested media size as a custom size.
Hi Maxim. Thanks for the quick reply. I'll paste the screenshot below, but I tried setting up a custom page size in the pagesetup of one sheet and that sheet seems to have worked. (Now I'm trying to figure out how to save a pagesetup that works and apply it to multiple sheets in publish...)
Sorry, but screen shot you provided is not Publish window, but Plot details window.
Publish window is one that appears when you call PUBLISH command.
I asked to attach Publish window with all settings just before you pick OK to start publish.
I also noticed the path to the drawing you tried to publish:
File: /Volumes/#####/2013/13-013 ##### /07-Drawings/13013 L2 Materials and grading.dwg
What are the strange symbols in names of Volume and Folder:
"####"
Do you have it when you look at them in Finder?
Does the names contain non-Latin symbols?
Maxim