copyclip problem

[abm2k]

hi,

when i use copyclip command & select object its take time for selection,

I mean when i select an object AutoCAD slows down sometime hang also

If I insert this file as xref to another file it takes time also.

If anyone knows the solution please please let me know.

Thanks in Advance

A.

[maxim_k]

Hi,

It could depend on contents of your file, so without hawing it at hand it is difficult to say about the solution.
Check if you have:
- a lot of parametric constraints in your problem file,
- a lot of Layer groups (filters)
- try to use AUDIT command to fix errors in the file,
- try to use -WBLOCK command to write whole file to the disk as new file,
- check if you have Proxy objects created in AutoCAD verticals or third parity applications,
- etc...
If you can, you can post problem file here, I'll try to investigate

Maxim

[abm2k]

hi,

thanks for your reply.

I tried Audit & WBlock the whole file but it has the same problem.

so I am attaching this file for your investigation

Thanks

A.

[maxim_k · Accepted solution]

Your drawing was full of AcDgnLS proxy objects:

Simple -WBLOCK command with * option cleared them:

Command: -WBLOCK
Enter name of existing block or
[= (block=output file)/* (whole drawing)] <define new drawing>: *
Command:

See attached DWG. Does delays gone away on your side?

Maxim

[abm2k]

hi,
Thank you very much Mr. Maxim
It's work the delays is gone
Thanks