AutoCAD for Mac Forum
Welcome to Autodesk’s AutoCAD for Mac Forums. Share your knowledge, ask questions, and explore popular AutoCAD for Mac topics.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Autocad 2013 installation "incompatible graphics card?

5 REPLIES 5
SOLVED
Reply
Message 1 of 6
Antondw2
1003 Views, 5 Replies

Autocad 2013 installation "incompatible graphics card?

Any solution to the above problem please?

 

Intel GMA X3100:

  Chipset Model:GMA X3100

  Type:Display

  Bus:Built-In

  VRAM (Total):144 MB

  Vendor:Intel (0x8086)

  Device ID:0x2a02

  Revision ID:0x0003

Anton dw

5 REPLIES 5
Message 2 of 6
maxim_k
in reply to: Antondw2

Welcome to the Autodesk Forums!

 

Hi,

Which Mac model do you have?

 

Maxim


Do you find the posts helpful? "LIKE" these posts!
Have your question been answered successfully? Click 'ACCEPT SOLUTION' button.


Maxim Kanaev
Architect
MARSS

MacACAD | Linkedin

Etiquette and Ground Rules of Autodesk Community
Message 3 of 6
maxim_k
in reply to: Antondw2

I checked just now- it seems you have 13" MacBook (2008 model).
As I know only Mac models from 2009 and later are supported do AutoCAD for Mac (all versions from 2011)
So, unfortunately there is no solution for your Mac model if you want to install AC for Mac on it.

Maxim

Do you find the posts helpful? "LIKE" these posts!
Have your question been answered successfully? Click 'ACCEPT SOLUTION' button.


Maxim Kanaev
Architect
MARSS

MacACAD | Linkedin

Etiquette and Ground Rules of Autodesk Community
Message 4 of 6
Antondw2
in reply to: maxim_k

Hi maxim it is a 4.1 MacBook?

Sent from my iPad
Anton de Wit
Director of Engineering & ICT
Gotel Communications Ltd
Yola
Adamawa State
Nigeria.
9° 18.2929 N 12° 28.4575 E
Email: Anton.dewit@gotelafrica.com
Skype: Coppertronics Engineering Services
Cell: +234 (08185363761) Etesalat
Cell: +234 (07080597632) Airtel
Cell SA : +27 (0) 836531161 MTN
Message 5 of 6
Antondw2
in reply to: maxim_k

Thanks Maxim , bad luck , what is the option to have Duel O S systems on the Mac OS and PC ? What's the best way to load the sys,s if possible ?
Regards

Sent from my iPad
Anton de Wit
Director of Engineering & ICT
Gotel Communications Ltd
Yola
Adamawa State
Nigeria.
9° 18.2929 N 12° 28.4575 E
Email: Anton.dewit@gotelafrica.com
Skype: Coppertronics Engineering Services
Cell: +234 (08185363761) Etesalat
Cell: +234 (07080597632) Airtel
Cell SA : +27 (0) 836531161 MTN
Message 6 of 6
maxim_k
in reply to: Antondw2

Hi Anton,

It all depends on how much RAM you have on your Mac, if it is below 3 Gb, than I can suggest you to install Windows on Bootcamp partition. You will need to reboot your Mac each time you want to use different OS.
If your Mac has enough RAM, than you can install Windows in virtual machine (use Parallels Desktop or VMWare Fusion), than you will be able to run Mac OS and Windows simultaneously.

Maxim

Do you find the posts helpful? "LIKE" these posts!
Have your question been answered successfully? Click 'ACCEPT SOLUTION' button.


Maxim Kanaev
Architect
MARSS

MacACAD | Linkedin

Etiquette and Ground Rules of Autodesk Community

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Autodesk Design & Make Report

”Boost