AutoCAD Express Tools

Reply
Active Member
CottageCGirl
Posts: 9
Registered: ‎04-21-2004
Message 1 of 6 (116 Views)

Who Has

116 Views, 5 Replies
08-17-2004 06:20 AM
I have tried to use whohas.arx with no luck, all I get is "No Owner Information Available". I have searched the old topics and the last posting was from 2002. I am running 2004 on a network. How can I get this working, or is there some other application I can use.
*Pat Trudeau
Message 2 of 6 (116 Views)

Re: Who Has

08-17-2004 01:13 PM in reply to: CottageCGirl
Both you and the other users have to load whohas to make it work. Pat "CottageCGirl" wrote in message news:10220781.1092748837071.JavaMail.jive@jiveforum2.autodesk.com... > I have tried to use whohas.arx with no luck, all I get is "No Owner Information Available". I have searched the old topics and the last posting was from 2002. I am running 2004 on a network. How can I get this working, or is there some other application I can use.
*jonesr
Message 3 of 6 (116 Views)

Re: Who Has

08-18-2004 01:58 PM in reply to: CottageCGirl
And as I recall, it won't work if you start AutoCAD by double-clicking on a file in Explorer. Correct me it this is inaccurate. "Pat Trudeau" wrote in message news:4122678c$1_2@newsprd01... > Both you and the other users have to load whohas to make it work. > > Pat > > "CottageCGirl" wrote in message > news:10220781.1092748837071.JavaMail.jive@jiveforum2.autodesk.com... > > I have tried to use whohas.arx with no luck, all I get is "No Owner > Information Available". I have searched the old topics and the last posting > was from 2002. I am running 2004 on a network. How can I get this working, > or is there some other application I can use. > >
Active Member
CottageCGirl
Posts: 9
Registered: ‎04-21-2004
Message 4 of 6 (116 Views)

Re: Who Has

08-19-2004 11:23 AM in reply to: CottageCGirl
I loaded it on 2 machines and tested, all I got was"No Owner Information Available" again.....
*Tim Duzan
Message 5 of 6 (116 Views)

Re: Who Has

08-19-2004 01:00 PM in reply to: CottageCGirl
Not sure why it's doing that, but to narrow down who's machine it is, you might open Land Enabled on one machine, and on the same machine open the same drawing to force a read only. That will let you know if it's a specific machine. -- Tim Duzan Jones & Boyd, Inc. LDT 2005 & Civil 3D "CottageCGirl" wrote in message news:7093785.1092939817708.JavaMail.jive@jiveforum2.autodesk.com... > I loaded it on 2 machines and tested, all I got was"No Owner Information Available" again.....
*Pat Trudeau
Message 6 of 6 (116 Views)

Re: Who Has

08-20-2004 06:19 AM in reply to: CottageCGirl
I know this has worked in the past, but it isn't today. I'm on XP and others are on 2000. Also, I have tried it in 2005 and 2004 checking against another 2004 user, still user unknown. Tim's test worked for me. Don't know where to go from here. We don't really use it here, very much. We just shout over the cubicles. Pat "Tim Duzan" wrote in message news:412506c1$1_3@newsprd01... > Not sure why it's doing that, but to narrow down who's machine it is, you > might open Land Enabled on one machine, and on the same machine open the > same drawing to force a read only. That will let you know if it's a specific > machine. > > -- > > Tim Duzan > Jones & Boyd, Inc. > LDT 2005 & Civil 3D > > "CottageCGirl" wrote in message > news:7093785.1092939817708.JavaMail.jive@jiveforum2.autodesk.com... > > I loaded it on 2 machines and tested, all I got was"No Owner Information > Available" again..... > >
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.