AutoCAD Electrical Forum
Welcome to Autodesk’s AutoCAD Electrical Forums. Share your knowledge, ask questions, and explore popular AutoCAD Electrical topics.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

wire reference issues

1 REPLY 1
Reply
Message 1 of 2
gbains
416 Views, 1 Reply

wire reference issues

I can't seem to have line reference wire numbers on my ladder. I set it in the project settings to 1,2,3 but the numbers remain the same as the first line number. Any suggestions ?

1 REPLY 1
Message 2 of 2
dougmcalexander
in reply to: gbains

I'm not sure if this is the issue or not, but the wire number doesn't change through node dots.  It will change once you insert symbols onto a rung but it will only change on the side of the symbol that is opposite the ladder rail (bus).  See attached screen capture.  I'm just guessing since I haven't seen your drawing, but this can sometimes be confusing for new users of ACE.  The line reference-based wire numbers can only start if the is a component separating the rung from the rail (bus).



Doug McAlexander


Design Engineer/Consultant/Instructor/Mentor specializing in AutoCAD Electrical training and implementation support

Phone and Web-based Support Plans Available

Phone: (770) 841-8009

www.linkedin.com/in/doug-mcalexander-1a77623




Please Accept as Solution if I helped you. Likes are also much appreciated.

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Autodesk Design & Make Report

”Boost