A customer has requested the PLC IO wire numbers AND the line reference on thier schematic. I can check the box that says "search for PLC I/O" and that's all I get. It won't let me add suffixes or I'm not doing it right. If I just use plain referenced wire numbers, I can't find an override code for the PLC address. Any help would be greatly appreciated.
![Autodesk Design & Make Report](https://forums.autodesk.com/t5/image/serverpage/image-id/1350519iCB55845EBFC43016/image-size/large?v=v2&px=999" "Autodesk Design & Make Report")
