AutoCAD Electrical General Discussion

AutoCAD Electrical General Discussion

Reply
Active Contributor
40 Posts
4 Kudos
Registered: ‎03-16-2012
Post 11 of 12

Re: WD_TB Issues for Beginner

04-25-2012 07:18 AM in reply to: Outbound

I ran into this problem before during the development of our title blocks.  From the drawing that you supplied it looks like the WD_TB was inserted seperatly from the title block.  The solution that we came up with was to insert it in the base title block, then insert the title block.  The WD_TB should be invisible after that.  The WD_TB should also be an attribute in the title block, not a block. Attached is a sample from our title block here.

Active Contributor
37 Posts
0 Kudos
Registered: ‎04-20-2012
Post 12 of 12

Re: WD_TB Issues for Beginner

04-25-2012 07:47 AM in reply to: bholle

Thanks to all of you.  I FINALLY got it!

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Need installation help?

Start with some of our most frequented solutions to get help installing your software.

New AutoCAD Electrical Category!

The AutoCAD Electrical forum has moved into it's very own category page, and can no longer be found within the Additional Product Forums.

Announcements
Manufacturing Community
The Manufacturing Community provides additional access to tips, tutorials, blogs and networking with peers.