AutoCAD Electrical Forum
Welcome to Autodesk’s AutoCAD Electrical Forums. Share your knowledge, ask questions, and explore popular AutoCAD Electrical topics.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Terminals

4 REPLIES 4
Reply
Message 1 of 5
bcsparks
353 Views, 4 Replies

Terminals

I am using a terminal "round with wire number" not using "round with wire number change".  When I insert it I have one wire number on the left and a different wire number on the right.  I want the same wire number on both sides?  What am I doing wrong?

4 REPLIES 4
Message 2 of 5
ampster402
in reply to: bcsparks

Message 3 of 5
bcsparks
in reply to: bcsparks

Yes  Auto Cad Electrical 2012

Message 4 of 5
dougmcalexander
in reply to: bcsparks

You must have your project properties set for wire numbering on a per wire basis.  That is infact a wire number.  If you want your wire numbers to represent node numbers, uncheck the per wire basis setting in project properties.  By the way, it is not checked by default so someone must have intentionally checked it.



Doug McAlexander


Design Engineer/Consultant/Instructor/Mentor specializing in AutoCAD Electrical training and implementation support

Phone and Web-based Support Plans Available

Phone: (770) 841-8009

www.linkedin.com/in/doug-mcalexander-1a77623




Please Accept as Solution if I helped you. Likes are also much appreciated.
Message 5 of 5
bcsparks
in reply to: bcsparks

Yep, that was the problem and I am probably the one that checked that box for some reason.  Thanks allot!!!

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Autodesk Design & Make Report

”Boost