I'm confused, the software is confused
My terminals are 2 levels, left and right, each plastic termianal has 4 screws
does autocad E number each group of 4 as terminal number 1? and the next group of 4 as terminal number 2
so terminal
1 left lower
1 left lower
1 right upper
2 right upper?
each of he 4 terminals on the schematic are all numbered 1?
has anyone got an example of a schematic drawing with a UKK5 or equivalent terminal block
Thanks
Steve
Solved! Go to Solution.
Solved by Yeletah. Go to Solution.