AutoCAD Electrical Forum
Welcome to Autodesk’s AutoCAD Electrical Forums. Share your knowledge, ask questions, and explore popular AutoCAD Electrical topics.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

terminal strip wire directions problem

1 REPLY 1
Reply
Message 1 of 2
ChemE
172 Views, 1 Reply

terminal strip wire directions problem

I've inserted a terminal strip onto my panel layout drawing and run the schematic wire connections--footprint command to get my wire information to display. When I inserted the terminal strip (using the terminal strip editor), I toggled the location of the terminal destinations to all be internal. However, there is wiring text information showing up on both sides of the terminal strip. What am I doing wrong?
1 REPLY 1
Message 2 of 2
dougmcalexander
in reply to: ChemE

HI ChemE! Can you send a drawing sample and let me look at it. If you have wiring information appearing both sides it usually indicates that ACADE found more than one wire connected to the same terminal number in the schematic.


Doug McAlexander


Design Engineer/Consultant/Instructor/Mentor specializing in AutoCAD Electrical training and implementation support

Phone and Web-based Support Plans Available

Phone: (770) 841-8009

www.linkedin.com/in/doug-mcalexander-1a77623




Please Accept as Solution if I helped you. Likes are also much appreciated.

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Autodesk Design & Make Report

”Boost