AutoCAD Electrical General Discussion

AutoCAD Electrical General Discussion

Reply
Active Contributor
WICK
Posts: 41
Registered: ‎12-03-2003
Message 1 of 2 (83 Views)

Switching Types?

83 Views, 1 Replies
01-16-2004 11:57 AM
I am laying out Electrical Devices in my Lighting plans and am curious as to how other people are designating switching types to the lighting fixtures and switches. For the time being, I am just putting text next to the fixtures and switches to illustrate the switching types. There has to be a better way of doing this. The fixtures have ID types but not switching types? Any suggestions?
*Abhishek Singhal
Message 2 of 2 (83 Views)

Re: Switching Types?

01-16-2004 09:35 PM in reply to: WICK
You might want to edit your symbols and add RATINGn attributes and standardize on a RATING2 or RATING3 etc to put the switching type. Putting text is anyway a bad idea because its not "ACAD Electrical Smart" Hope this helps ... Regards Abhishek "WICK" wrote in message news:28936841.1074283113990.JavaMail.jive@jiveforum1.autodesk.com... > I am laying out Electrical Devices in my Lighting plans and am curious as to how other people are designating switching types to the lighting fixtures and switches. For the time being, I am just putting text next to the fixtures and switches to illustrate the switching types. There has to be a better way of doing this. The fixtures have ID types but not switching types? Any suggestions?
Announcements
Manufacturing Community
The Manufacturing Community provides additional access to tips, tutorials, blogs and networking with peers.
Need installation help?

Start with some of our most frequented solutions to get help installing your software.

New AutoCAD Electrical Category!

The AutoCAD Electrical forum has moved into it's very own category page, and can no longer be found within the Additional Product Forums.