style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<cbasulto> wrote in messageIn
a Drawing with a PLC Output Card I have a CB and a SOL, the attributes for my
Component are %F%X-%N When I use the "Project-Wide Update or Retag" option and
check the Component Retag box it names the component SOL-12, where "12" is the
Line Number. On the same Drawing if I use the menu, Components-Component
Tagging-Retag Components, it changes the name of the Solenoid to SOL-O:5/3 The
address for the CB on both cases is CB-O:5/3 The Component properties are the
same for my Project and my Drawing and I have the "Search for PLC I/O address
on insert" box checked How can I make that the Project Wide Retag option leave
the name of the Solenoid with the PLC address instead of the line number? I
tried this on ACAD Electrical 2008 and 2009 and I got the same results.
Start with some of our most frequented solutions to get help installing your software.
The AutoCAD Electrical forum has moved into it's very own category page, and can no longer be found within the Additional Product Forums.