AutoCAD Electrical General Discussion

AutoCAD Electrical General Discussion

Reply
*Expert Elite*
3,225 Posts
293 Kudos
Registered: ‎10-18-2003
Post 11 of 14

Re: Reports

01-23-2013 11:20 AM in reply to: Justin2012

The jumper chart displays jumpers between terminal blocks or the various levels of multilevel terminal blocks. It is not intended to display jumpers between the wire connections of a PLC or other devices.

Doug McAlexander
Independent Consultant/Instructor/Mentor specializing in AutoCAD Electrical, ecscad, and promis-e implementation

Web site: www.ECADConsultant.com
Phone: (770) 841-8009

Please Accept as Solution if I helped you. Kudos are also much appreciated.
Distinguished Contributor
221 Posts
0 Kudos
Registered: ‎01-25-2012
Post 12 of 14

Re: Reports

01-23-2013 02:23 PM in reply to: dougmcalexander

Ok, is there another way to show this internal jumpers?

Also, I have my automatic report set up BUT for some reason the BOM is coming out differently( not picking the Suppress Item Column Repeats). Please refer to the picture and advise what I am doing wrong.

 

Thanks you.

Justin

Distinguished Contributor
221 Posts
0 Kudos
Registered: ‎01-25-2012
Post 13 of 14

Re: Reports

01-25-2013 01:16 PM in reply to: dougmcalexander

Any help on the above the question , please.

 

Thanks.

Distinguished Contributor
221 Posts
0 Kudos
Registered: ‎01-25-2012
Post 14 of 14

Re: Reports

05-28-2013 01:03 PM in reply to: Justin2012

Has anyone find the solution on how to get an automate list of all the internally jumped wires - that is wires jumped from IN1 to IN2 (not terminals)?

 

How can I set up my "Report Format File Setup to exclude the PUT ON DRAWING. I want all the other options but no put on drawing.

 

Please assist. Thanks for any help. 

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Need installation help?

Start with some of our most frequented solutions to get help installing your software.

New AutoCAD Electrical Category!

The AutoCAD Electrical forum has moved into it's very own category page, and can no longer be found within the Additional Product Forums.

Announcements
Manufacturing Community
The Manufacturing Community provides additional access to tips, tutorials, blogs and networking with peers.