AutoCAD Electrical General Discussion

AutoCAD Electrical General Discussion

Reply
Distinguished Contributor
112 Posts
0 Kudos
Registered: ‎12-23-2003
Post 1 of 1

Multi-Bom not on Panel

63 Views, 0 Replies
12-23-2003 09:13 AM
For example, I create a multi-bom item in the schematic consisting of a fuse holder and a fuse as item 01. In the panel layout drawing the schematic components list shows two items, the fuse holder and the fuse listed with the same tag ID.

I have been creating dumb blocks, one for the holder and one for the fuse. This creates an accurate BOM, but the multi-bom hierarchy is lost in the panel BOM report.

The exception report then reports that the mult-bom item 01 is missing as well as multiple instance and part number mismatch.

What is the correct procedure for linking the multi-bom hierarchy from the schematic to the panel layout and panel BOM.

Thank you
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Need installation help?

Start with some of our most frequented solutions to get help installing your software.

New AutoCAD Electrical Category!

The AutoCAD Electrical forum has moved into it's very own category page, and can no longer be found within the Additional Product Forums.

Announcements
Manufacturing Community
The Manufacturing Community provides additional access to tips, tutorials, blogs and networking with peers.