The current shipping version of AutoCAD Electrical does not include a set of
ISA instrument symbols. The example shown in the on-line documentation under
"Chapter 18 - Frequently Asked Questions > Inter-Discipline Peer-to-Peer
Setup" illustrates what attributes you would need to add to a non-electrical
"peer" symbol to allow for inter-discipline cross-ref. So, if you are dealing
with related instrument drawings and have instrument bubble symbols, add in the
normal AutoCAD Electrical attributes TAG1 (or TAG1_PART1 / TAG1_PART2 for a
"split" tag), WDTAGALT, and WDTYPE.
Attached is a file with a couple bubbles set up with these attributes.
With this in place, the instrument bubble can carry the schematic equivalent
symbol's tag-ID and the schematic symbol can carry the intrument's assigned
tag-ID as illustrated in the on-line help.
style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
pment.com> wrote in
I would like to cross reference between our
electrical schematic and a
Where is the "instrument bubble" refered to
manual, and must I edit the existing
electrical components to include the
Start with some of our most frequented solutions to get help installing your software.
The AutoCAD Electrical forum has moved into it's very own category page, and can no longer be found within the Additional Product Forums.