Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
has anybody got experiance with putting non standard installtion codes into acade
my client insists that cables are as follows
w=xxx+yyy-zzzz format where "w=xxx" is placed in the instalation box of the cable editor menu location and tag are normal
i have done this for a test project with 4 multicore cables generated reports placed then in the project all details are correct tried an electircal audit no new error messages are created so it appears to work
so my question has anybody else done this and have they had any typre of issue with this
If the reports give you what you want, go for it !
An empty audit report is always a bonus too.
Trond Hasse Lie AutoCAD Electrical and EPLAN expert Ctrl Alt El Please select "Accept Solution" if this post answers your question. 'Likes' won't hurt either. 😉
!
![Autodesk Design & Make Report](https://forums.autodesk.com/t5/image/serverpage/image-id/1350519iCB55845EBFC43016/image-size/large?v=v2&px=999" "Autodesk Design & Make Report")
