AutoCAD Electrical Forum
Welcome to Autodesk’s AutoCAD Electrical Forums. Share your knowledge, ask questions, and explore popular AutoCAD Electrical topics.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

HELP - Tool tips

4 REPLIES 4
Reply
Message 1 of 5
Anonymous
173 Views, 4 Replies

HELP - Tool tips

How do you turn off the tooltips?
I have set it to <0> but it will not disappear.

See attached screenshot.

Thanks
Chad
4 REPLIES 4
Message 2 of 5
Anonymous
in reply to: Anonymous

Chad,

The ToolTips variable, when set to 0) will turn off the tooltips that appear
when you put the cursor over one of the icons on a toolbar but will not turn
off notifications on the tray like the one shown in your graphic, the
communication center notification. If you would like to turn that off,
click on the little satellite icon on the lower right of your screen and
select 'Settings' on the 'Communications Center' dialog. Then you can
toggle off the 'Enable Balloon Notification for new announcements' option.

You can also select on the down arrow directly to the right of these tray
icons and select 'Tray Settings'. This will bring up a dialog with more
options to control these services.

You might want to check all the setting out before choosing which ones to
turn off.

Steve

wrote in message news:4877440@discussion.autodesk.com...
How do you turn off the tooltips?
I have set it to <0> but it will not disappear.

See attached screenshot.

Thanks
Chad
Message 3 of 5
Anonymous
in reply to: Anonymous

Steve,
Thanks for the info.
Maybe is wasn't clear on the picture or called it by the wrong name.
What I want to get rid of is the little shaded rectangle that appears below the cross hairs telling you what to do such as "pick other corner"
While it may be helpful if you are a new user, I find it very annoying.

Chad
Message 4 of 5
Anonymous
in reply to: Anonymous

fdna59

Along the bottom of your screen where you have the "buttons" for OSNAP,
SNAP, GRID, etc...you should see one that says DYN, you can turn the new
Heads-Up display off here. You can also right-click and go into more
settings regarding this feature.

I hope this helps!

--
=======================
Jared (Autodesk, Inc)
=======================
wrote in message news:4877467@discussion.autodesk.com...
Steve,
Thanks for the info.
Maybe is wasn't clear on the picture or called it by the wrong name.
What I want to get rid of is the little shaded rectangle that appears below
the cross hairs telling you what to do such as "pick other corner"
While it may be helpful if you are a new user, I find it very annoying.

Chad
Message 5 of 5
Anonymous
in reply to: Anonymous

Jared,
Thank you, that is what I wanted to turn off

Chad

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Autodesk Design & Make Report

”Boost