AutoCAD Electrical General Discussion

AutoCAD Electrical General Discussion

Reply
Active Contributor
ddemerath
Posts: 34
Registered: ‎11-12-2003
Message 1 of 3 (117 Views)

Disappearing PLC Information

117 Views, 2 Replies
01-07-2004 02:13 PM
I have presently defined an Allen Bradley 1762-IF2OF2 module for a Microlgix 1200. When I insert it into the drawing, all the default info shows up as expected. When I go into the module to edit the info so I can specify a location, I lose some of the default lines. I can put them in but they keep going blank. How can I get these values to stay put? The vales in question are:
Tag
Line1
Line2
Mfg
Cat
Location

Dick
Active Contributor
ddemerath
Posts: 34
Registered: ‎11-12-2003
Message 2 of 3 (117 Views)

Re: Disappearing PLC Information

01-09-2004 09:31 AM in reply to: ddemerath
It turned out to be a header terminal used 3 times. I replaced the last 2 bad ones, and everything turned out ok.
*Nate Holt \(Autodesk\)
Message 3 of 3 (117 Views)

Re: Disappearing PLC Information

01-12-2004 07:02 PM in reply to: ddemerath
Dick, If you're willing to send me a sample dwg illustrating the problem below, I can take a look. Let me know. thanks, Nate. "ddemerath" wrote in message news:18229640.1073513688344.JavaMail.javamailuser@localhost... > I have presently defined an Allen Bradley 1762-IF2OF2 module for a Microlgix 1200. When I insert it into the drawing, all the default info shows up as expected. When I go into the module to edit the info so I can specify a location, I lose some of the default lines. I can put them in but they keep going blank. How can I get these values to stay put? The vales in question are: > Tag > Line1 > Line2 > Mfg > Cat > Location > > Dick
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Need installation help?

Start with some of our most frequented solutions to get help installing your software.

New AutoCAD Electrical Category!

The AutoCAD Electrical forum has moved into it's very own category page, and can no longer be found within the Additional Product Forums.

Announcements
Manufacturing Community
The Manufacturing Community provides additional access to tips, tutorials, blogs and networking with peers.