AutoCAD Electrical Forum
Welcome to Autodesk’s AutoCAD Electrical Forums. Share your knowledge, ask questions, and explore popular AutoCAD Electrical topics.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Direct Connection of Components

1 REPLY 1
Reply
Message 1 of 2
pqphillips
393 Views, 1 Reply

Direct Connection of Components

Okay, here's a doozy... I have five parts (3x MSPs, a 3 phase feeder terminal, and a three phase bus). I physically understand how they connect (i.e. 3 phase power hooks to the feeder terminal, terminal is direct connectected to the MSP via a spade (along with the bus) and the two other MSPs are direct connected to the bus.

 

My issue is how to represent that in Electrical. Any thoughts?

1 REPLY 1
Message 2 of 2

You can show direct connections by clicking the wire command and starting additional wires at the same wire connection of a previous wire. This is a unique ability of AutoCAD Electrical. You can click the drop down arrow of the wire icon and preselect different angles to use for the additional wires coming off the same wire connection.


Doug McAlexander


Design Engineer/Consultant/Instructor/Mentor specializing in AutoCAD Electrical training and implementation support

Phone and Web-based Support Plans Available

Phone: (770) 841-8009

www.linkedin.com/in/doug-mcalexander-1a77623




Please Accept as Solution if I helped you. Likes are also much appreciated.

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Autodesk Design & Make Report

”Boost