DIN RAIL COMPONENTS

Anonymous · ‎05-08-2006

I have noticed when I use din rail on a panel and then put an ACE terminal connection on the din rail, the din rail hides under the terminal. How do I make it so the footprints I make do the same thing, and hide the din rail it sits over.
Thanks

kakaka · ‎05-08-2006

Did you use Black Box Builder to create you footprint?

dougmcalexander · ‎05-08-2006

It is done with a feature called wipeout. Check the AutoCAD help system for more about wipeout. Not the Electrical Help system but the F1 help.

Doug McAlexander

Design Engineer/Consultant/Instructor/Mentor specializing in AutoCAD Electrical training and implementation support

Phone and Web-based Support Plans Available

Phone: (770) 841-8009

www.linkedin.com/in/doug-mcalexander-1a77623

Please Accept as Solution if I helped you. Likes are also much appreciated.

Anonymous · ‎05-08-2006

fastbackgt68,
I have a post on my blog site about this. Here are the links.

http://robstein.blogs.com/rob_stein_knowledge_cente/2006/02/footprints_that.html

and

http://robstein.blogs.com/rob_stein_knowledge_cente/2006/04/footprints_that.html

I hope this helps and if you have any questions feel free to email me.

Thanks
Rob Stein
INCAT
www.robstein.blogs.com

Anonymous · ‎05-09-2006

went to ACE help and the blog helped also. Thanks for the assistance

Joe

DIN RAIL COMPONENTS

DIN RAIL COMPONENTS

Forums Links

Post to forums