corruped page

[Anonymous]

I attached the page from my project that is corrupted. Attribute/hide layer doesn't work and every possible hidden layer got displayed on this page. The rest of the project is fine. Can anyone help me with this issue? Thank you.

[Anonymous]

Please open your drawing and change system variable ATTMODE from a 2 to 1
(type ATTMODE at your command line, enter a value of 1, then hit [Enter].
This setting of 1 will allow all hidden attributes to actually display as
hidden.

How did this happen? There are some commands in AcadE that require this
system to temporarily flip all attributes to visible. If one of these
commands ends prematurely, the system variable may fail to set ATTMODE back
to its normal value of 1 (where hidden attributes are shown as "hidden"
instead of 2 where all attributes, hidden or not hidden, are displayed).

If this manual flipping of ATTMODE back to a value of 1 doesn't resolve the
problem you're seeing, please let me know!

thanks,
Nate.

wrote in message news:5141177@discussion.autodesk.com...
I attached the page from my project that is corrupted. Attribute/hide layer
doesn't work and every possible hidden layer got displayed on this page.
The rest of the project is fine. Can anyone help me with this issue? Thank
you.

[Anonymous]

Thank you very much for your help. You saved me a lot of time. It worked. This variable changed itself when I was trying to link existing wires with previous page and it wasn't working well. Thanks again.