Ressurecting an old post because I found it very helpful.
One thing I want to add that was not apparent from the help file was that the TERMx value has to be on the footprint for the other added attributes to work. I initially added only the WIRENOx attribute to the footprint and it was not updating until I added the TERMx att. Since I do not want to have the TERMx info displayed, I just hid it in the footprint and everything works like a Charm.
Also the associated att has to exist in the schematic symbol; i.e. I wanted the wire number of a distribution block to appear on the footprint so I had to add WIRENO01 to the schematic symbol and TERM01 and WIRENO01 to the footprint symbol.
Thanks again Pat!!
Access a broad range of knowledge to help get the most out of your products and services.
Start with some of our most frequented solutions to get help installing your software.
The AutoCAD Electrical forum has moved into it's very own category page, and can no longer be found within the Additional Product Forums.
Upgrading to a 2015 product? Make sure to check these out 1st!