AutoCAD Electrical General Discussion

AutoCAD Electrical General Discussion

Reply
Distinguished Contributor
SRayC
Posts: 228
Registered: ‎12-10-2003
Message 1 of 4 (79 Views)

Co-existing ??

79 Views, 3 Replies
02-06-2004 08:26 AM
Can AcadE 2004 co-exist on the same machine with the following:
Acad200
Mech Desktop 2004
Inventor 7 SP1

Thanks
Ray C.
*Jared Bunch \(Autodesk, Inc\)
Message 2 of 4 (79 Views)

Re: Co-existing ??

02-16-2004 12:21 AM in reply to: SRayC
Ray I am not sure what version of AutoCAD you were referring to as it only came across as Acad200 I had MDT 2004 and INV 7 installed on my machine with ACADE 2204 and saw problems. I currently have MDT2004DX and INV 8 and still see no problems. These product should be able to run side-by-side without any issues. Good luck and have fun with the products!! -- Regards, Jared Bunch Technical Support Specialist Autodesk, Inc "srayc" wrote in message news:13781652.1076084796632.JavaMail.jive@jiveforum2... > Can AcadE 2004 co-exist on the same machine with the following: > Acad200 > Mech Desktop 2004 > Inventor 7 SP1 > > Thanks > Ray C.
*Jared Bunch \(Autodesk, Inc\)
Message 3 of 4 (79 Views)

Re: Co-existing ??

02-16-2004 02:11 AM in reply to: SRayC
Oops....my previous post was supposed to have said that I had AutoCAD Electrical installed with MDT2004 and INV 7 and did not see any problems. There have been no reported problems with MDT2004DX and INV 8 either. You should be fine. Sorry for the previous post! "Jared Bunch (Autodesk, Inc)" wrote in message news:40307d74$1_2@newsprd01... > Ray > > I am not sure what version of AutoCAD you were referring to as it only > came across as Acad200 > > I had MDT 2004 and INV 7 installed on my machine with ACADE 2204 and saw > problems. I currently have MDT2004DX and INV 8 and still see no problems. > These product should be able to run side-by-side without any issues. > > Good luck and have fun with the products!! > > > -- > Regards, > > Jared Bunch > Technical Support Specialist > Autodesk, Inc > > > "srayc" wrote in message > news:13781652.1076084796632.JavaMail.jive@jiveforum2... > > Can AcadE 2004 co-exist on the same machine with the following: > > Acad200 > > Mech Desktop 2004 > > Inventor 7 SP1 > > > > Thanks > > Ray C. > >
Distinguished Contributor
SRayC
Posts: 228
Registered: ‎12-10-2003
Message 4 of 4 (79 Views)

Re: Co-existing ??

02-16-2004 07:11 AM in reply to: SRayC
Thanks for the reply!
It was Acad2000.
I have installed AcadE2004 and things seem OK, but I have not tried anything complicated YET!

Ray C.
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Need installation help?

Start with some of our most frequented solutions to get help installing your software.

New AutoCAD Electrical Category!

The AutoCAD Electrical forum has moved into it's very own category page, and can no longer be found within the Additional Product Forums.

Announcements
Manufacturing Community
The Manufacturing Community provides additional access to tips, tutorials, blogs and networking with peers.