Ive been searching the net for this for hours now and im just wondering if im being stupid in thinking there is a AutoCAD Electrical symbol for a 3 phase contactor or do you have to put 3 seperate contacts in and parent them to a contactor coil?
I'm running AutoCAD Electrical 2011.
I hope im not being stupid and the anwser is in front of me.
If anyone can help ive appreciate it.
That is the one to use for a motor contactor (3 Phase Starter Contacts NO). It is built dynamically from 3 NO/ contacts (HMS21) and then joined with a link line.Then you add the Starter coil as a parent and link it to the contacts.
I use ecscad and AutoCAD Electrical. The difference is that with ecscad, just like all other electrical CAD software, you must create a symbol for 1 contact, 2 contact, 3 contact, etc. AutoCAD Electrical builds the contacts dynamically by inserting multiple 1 pole contacts and combining them with a dashed link line to indicate they are activated together by the same coil, button, or selector. This method allows the software to insert the symbol across any wire spacing. If you wish to add a 4th contact, go to the menu for that type of symbol and look for a 2nd+ or 2+ type of symbol. This is used to add additional contacts to an existing symbol.
Start with some of our most frequented solutions to get help installing your software.
The AutoCAD Electrical forum has moved into it's very own category page, and can no longer be found within the Additional Product Forums.