Auto CAD MEP Electrical

[Anonymous]

Hi Everyoune,
I have a problem! recently our IT dept installed a new server where our CAD files are stored and they were forced to change the drive designations form an F to a Z which is normally ok you just have to do major repathing of all your projects and we have. Well the problem is this, we have been trying to impliment the MEP building systems for our electrical drawings and the project data base will not up date and I keep getting an error messege notifying me that the project can not be saved as the project data base (which is still trying to show up on the old drive) is not current. I went through and re pathed every thing in the project to reflect the new drive and when I check each iten in the project navigator and open them they all reference the proper drive on the server, but the error messege keeps seeing the old drive for the project data base (panels and circuits)and I can not save the new information what is going on here? am I missing something? Please help

[Anonymous]

Hello Peter!

You will probably want to post this question to the AutoCAD MEP group to
capture the right audience. This particular newsgroup is for the AutoCAD
Electrical product, which is a different product offering than the AutoCAD
MEP product. Below is the web link to the AutoCAD MEP newsgroup.

http://discussion.autodesk.com/forum.jspa?forumID=61

Good luck!!

--
-------------------------------------
-------------------------------------
Jared Bunch
Product Designer
Autodesk, Inc.
-------------------------------------------------------
-------------------------------------------------------
wrote in message news:5916908@discussion.autodesk.com...
Hi Everyoune,
I have a problem! recently our IT dept installed a new server where our CAD
files are stored and they were forced to change the drive designations form
an F to a Z which is normally ok you just have to do major repathing of all
your projects and we have. Well the problem is this, we have been trying to
impliment the MEP building systems for our electrical drawings and the
project data base will not up date and I keep getting an error messege
notifying me that the project can not be saved as the project data base
(which is still trying to show up on the old drive) is not current. I went
through and re pathed every thing in the project to reflect the new drive
and when I check each iten in the project navigator and open them they all
reference the proper drive on the server, but the error messege keeps seeing
the old drive for the project data base (panels and circuits)and I can not
save the new information what is going on here? am I missing something?
Please help

[Anonymous]

Thank you I just did it