AutoCAD Electrical General Discussion

AutoCAD Electrical General Discussion

Reply
Contributor
NetNathan
Posts: 14
Registered: ‎01-13-2012
Message 1 of 3 (239 Views)
Accepted Solution

ACADE 2011 "Locate File" error

239 Views, 2 Replies
02-15-2013 10:24 AM

Everytime ACADE 2011 starts up it keeps giving me a "Locate File" window.

The File:

C:\Acade 2011\AeData\Proj\608661\608661-03.dwg is not fouind at the defined location, or in the project folder for project 608661.  Click OK to locate manually. 

 

The drawing IS in the directory!

I click OK, locate file and have tried the Open, and Locate buttons, but I keep getting the same error on strt up.  I have even tried oipening the drawing and saving, but sane error. 

 

Any ideas? 

 

..

Hi Nathan,

 

Remove the drawing from the project.  (right click on the drawing select "Remove")

Then readd it. (right click on the Project and Select Add Drawing)

 

should solve the problem.

 

Regards,

 

James Alger

SolidCAD

Mentor
algerj
Posts: 219
Registered: ‎02-25-2010
Message 2 of 3 (224 Views)

Re: ACADE 2011 "Locate File" error

02-15-2013 01:04 PM in reply to: NetNathan

Hi Nathan,

 

Remove the drawing from the project.  (right click on the drawing select "Remove")

Then readd it. (right click on the Project and Select Add Drawing)

 

should solve the problem.

 

Regards,

 

James Alger

SolidCAD

Contributor
NetNathan
Posts: 14
Registered: ‎01-13-2012
Message 3 of 3 (192 Views)

Re: ACADE 2011 "Locate File" error

02-18-2013 02:10 PM in reply to: algerj

That fixed it.  I had tried this before, but the project was not active.  After making project active and doing what you said... everything ok.

Announcements
Manufacturing Community
The Manufacturing Community provides additional access to tips, tutorials, blogs and networking with peers.
Need installation help?

Start with some of our most frequented solutions to get help installing your software.

New AutoCAD Electrical Category!

The AutoCAD Electrical forum has moved into it's very own category page, and can no longer be found within the Additional Product Forums.