AutoCAD Electrical Forum
Welcome to Autodesk’s AutoCAD Electrical Forums. Share your knowledge, ask questions, and explore popular AutoCAD Electrical topics.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

ACADE 2007 MULTIPLE BOM'S

7 REPLIES 7
Reply
Message 1 of 8
alritter
245 Views, 7 Replies

ACADE 2007 MULTIPLE BOM'S

IN 2006 I DO TWO BOM'S ,ONE FOR HARDWARE AND ONE FOR PNEUMATIC. I USE TWO .SET FORMAT SETTING FILES.
BUT IN 2007 (USING THE SAME .SET FILES MOVED TO 2007)
THE HARDWARE BOM WORKS OK BUT WHEN I RUN THE PNEUMATICS BOM IT ONLY GETS A SMALL PART OF THE ITEMS. IF I RUN THE BOM ON JUST ONE DWG IT WORK FINE. WHY?
7 REPLIES 7
Message 2 of 8
Anonymous
in reply to: alritter

Could you post the 2 .SET files. I would like to try this with the same
layout/setup as you have.

Steve

wrote in message news:5214244@discussion.autodesk.com...
IN 2006 I DO TWO BOM'S ,ONE FOR HARDWARE AND ONE FOR PNEUMATIC. I USE TWO
.SET FORMAT SETTING FILES.
BUT IN 2007 (USING THE SAME .SET FILES MOVED TO 2007)
THE HARDWARE BOM WORKS OK BUT WHEN I RUN THE PNEUMATICS BOM IT ONLY GETS A
SMALL PART OF THE ITEMS. IF I RUN THE BOM ON JUST ONE DWG IT WORK FINE. WHY?
Message 3 of 8
alritter
in reply to: alritter

HOW TO I POST THEM
Message 4 of 8
Anonymous
in reply to: alritter

It is different depending on which News reader you are using, but for
Outlook Express reader when you reply there is an option called 'File
Attachment' from the Insert pull-down menu.

If you are using the web interface, I am not sure of the exact option, but
there should be an option somewhere mentioning something about Attaching a
file. If you need details, let me know and I will get the exact steps.

Steve

wrote in message news:5214310@discussion.autodesk.com...
HOW TO I POST THEM
Message 5 of 8
alritter
in reply to: alritter

here are the 1.set files i'm using
Message 6 of 8
alritter
in reply to: alritter

here is the 2nd file
Message 7 of 8
Anonymous
in reply to: alritter

Ok, I looked over the .SET files and they look Ok. I also used the .SET
files in some sample project here on both 2006 and 2007 and got the same
results in both packages on the same projects so maybe this has something to
do with the drawings themselves.

Do you have a small sample project that you could post that you are also
having this problem on?

Thanks,

Steve


wrote in message news:5214976@discussion.autodesk.com...
here is the 2nd file
Message 8 of 8
alritter
in reply to: alritter

do you have an email address so i can sent you a project.
can post it for all to see.
please email me with it al.ritter@marissystems.com

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Autodesk Design & Make Report

”Boost