AutoCAD Civil 3D Wishes

AutoCAD Civil 3D Wishes

Reply
Mentor
el_nath
Posts: 199
Registered: ‎04-14-2009
Message 1 of 3 (196 Views)

Create Surface/Feature Line from Section Views/Section View Groups

196 Views, 2 Replies
08-24-2012 09:22 AM

I wish to have the ability to create surfaces from polylines drawn on a Section View or a surface from polylines drawn on a Section View Group. This is has numerous uses.

 

One should be able to create a feature line by selecting the section view and the polyline. One should also be able to create a surface by selecting sny section view that is part of a section view group and then selecting the polylines that define that surface.

 

The command routine should be able to warn the user of any polylines that vertically overlap themsleves and will be rejected, while being able to construct the surface from the remaining polylines.

 

While there are techniques for "reverse engineering" a surface/feature line, they are quite time consuming and tedious.

 

 

Nathan Selles-Alvarez, P.E.
Senior Civil Engineer
*Expert Elite*
tcorey
Posts: 2,618
Registered: ‎12-18-2002
Message 2 of 3 (183 Views)

Re: Create Surface/Feature Line from Section Views/Section View Groups

09-20-2012 04:59 PM in reply to: el_nath

I've heard this request before, so you're not the only one asking for it.

 

If it's a big enough pain to you that you would pay for a solution, I can connect you to people who could do that for you, or just go to the Civil 3D customization group and ask. That's where the programmers hang out.

Tim Corey, Owner
Delta Engineering Systems
Redding, CA
Autodesk Authorized Value-Added Reseller
Mentor
el_nath
Posts: 199
Registered: ‎04-14-2009
Message 3 of 3 (163 Views)

Re: Create Surface/Feature Line from Section Views/Section View Groups

10-02-2012 12:02 PM in reply to: tcorey

I'm considering learning VB.NET and fooling around with the C3D API. I don't think my small compnay would be willing to pay for any extras.

(sigh)

Nathan Selles-Alvarez, P.E.
Senior Civil Engineer
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.