AutoCAD Civil 3D Wishes

AutoCAD Civil 3D Wishes

Reply
Active Contributor
Redli1
Posts: 38
Registered: ‎11-29-2011
Message 1 of 2 (624 Views)

Autocad Solids in Section Views and Profile

624 Views, 1 Replies
05-24-2012 04:29 AM

I would like to have sections of Autocad Solids in Civil3d sections views and profiles similar to the projection command but like the autocad command "sectionplanetoblock" with to option to see cut-away geometry and background lines 

 

 

 

Mentor
el_nath
Posts: 205
Registered: ‎04-14-2009
Message 2 of 2 (620 Views)

Re: Autocad Solids in Section Views and Profile

05-24-2012 06:27 AM in reply to: Redli1

Yes! This is simple and all it would require is some additional component types in the projection style (for both profile and sections):

Autocad Solid Occluded Edges

Autocad Solid Cut Edges

Autocad Solid Silhouette Edges

Autocad Solid Facet Edges

Autocad Solid Cut Face (with hatch options)

...and in the profile and section tabs of the projection style, a check box for back clipping on. This is either for elevation view sections or cut-away sections.

 

 

That should be a good start, good enough for most engineering drawings.

Nathan Selles-Alvarez, P.E.
Senior Civil Engineer
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Do you have 60 seconds to spare? The Autodesk Community Team is revamping our site ranking system and we want your feedback! Please click here to launch the 5 question survey. As always your input is greatly appreciated.