AutoCAD Civil 3D - Stormwater

AutoCAD Civil 3D - Stormwater

Reply
New Member
TimOConnor2000
Posts: 2
Registered: ‎03-30-2004
Message 1 of 3 (285 Views)
Accepted Solution

Storm Sewer V9.0 vs V10.0

285 Views, 2 Replies
01-04-2013 01:47 PM

I am running a *.stm file in C3D 2012 and then in C3D 2013 and I am getting different results.  Specifically, the some of the HGL have changed by up to 0.9 ft, the friction slope in the newer version is typically 0.000, and there are differences in some of the EGL, velocity head and minor losses.  The design codes appear to be the same in both.   I have tried a couple other *.stm files and am getting different results w/ them also.  Is there a setting or something that I am missing?

 

Thanks,

Tim

We are using 2012 SP2 and 2013 SP1.  We will open a support case.

Thanks.

Employee
Matt.Anderson
Posts: 2,909
Registered: ‎05-13-2005
Message 2 of 3 (284 Views)

Re: Storm Sewer V9.0 vs V10.0

01-04-2013 02:08 PM in reply to: TimOConnor2000

Please verify that which versions of 2012 and 2013 that you are running.  There were some changes in 2012 SP2 and 2013 SP1 that might cause the disjointed calculations. 

 

Can you open a support case?

Matthew Anderson, PE
Product Manager
New Member
TimOConnor2000
Posts: 2
Registered: ‎03-30-2004
Message 3 of 3 (268 Views)

Re: Storm Sewer V9.0 vs V10.0

01-07-2013 06:06 AM in reply to: Matt.Anderson

We are using 2012 SP2 and 2013 SP1.  We will open a support case.

Thanks.

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Are You Going To Be @ AU 2014? Feel free to drop by our AU topic post and share your plans, plug a class that you're teaching, or simply check out who else from the community might be in attendance. Ohh and don't forgot to stop by the Autodesk Help | Learn | Collaborate booths in the Exhibit Hall and meet our community team if you get a chance!